HOME VINYL RELATED AUDIO TECHNICA AT-OC9XEN MOVING COIL PHONO CARTRIDGE
DESCRIPTION
Meet the AT-OC9XEN
Moving Coil Phono Cartridge
The AT-OC9XEN is a premium moving coil phono cartridge with a 0.3 x 0.7 mil Elliptical Nude stylus.
The OC9X range features a new Dual Moving Coil structure, which enables the audio information in the record grooves to be separated to the left and right channels with pinpoint accuracy. This improved channel separation results in a more precise stereo image and wider frequency response. The moving coil wires in all OC9X Series cartridges are made from PCOCC (Pure Copper by Ohno Continuous Casting), for optimum signal purity.
The AT-OC9XENâs transducer engine is mounted onto a rigid aluminium body to help reduce unwanted internal vibrations and maintain sonic clarity. The cartridge bodies are pre-threaded, enabling them to be easily mounted to a headshell or tonearm with just two screws (no mounting nuts for the screws are required). Each OC9X Series cartridge is supplied with mounting hardware, a stylus brush and other accessories.
Product Features 0.3 x 0.7 mil Elliptical Nude stylus  Made from PCOCC (Pure Copper by Ohno Continuous for optimum signal purity  Aluminium body and cantilever to help reduce unwanted vibrations and maintain sonic clarity  Threaded inserts in cartridge body enable cartridge to be mounted to headshell with just two screws â no nuts required Technical Specifications
Type Dual Moving Coil
Body Material Aluminium
Mounting Feature Threaded inserts
Frequency Response 20 to 30,000 Hz
Channel Separation 25 dB (1 kHz)
Output Channel Balance 1.5 dB (1 kHz)
Output Voltage 0.35 mV (at 1 kHz, 5 cm/sec)
Vertical Tracking Angle 20 degrees
Vertical Tracking Force Range 1.8 to 2.2 g (standard 2.0 g)
Stylus Shape Elliptical Nude
Stylus Curvature Radius 0.3 x 0.7 mil
Stylus Construction Nude square shank
Cantilever Aluminium pipe
Static Compliance 20 x 10^(â6cm) / dyne
Dynamic Compliance 9 x 10^(â6 cm) / dyne (100 Hz)
Wire Used for Coil PCOCC
Terminal Pins Brass
Recommended Load Impedance Min 100 Ohm
Coil Impedance 12 Ohm
DC Resistance 12 Ohm
Coil Inductance 25 uH (1 kHz)
Cartridge Weight 7.6 g
Dimensions 17.3 (H) x 16.8 (W) x 25.7 (L) mm
Mounting 1/2" Centres/threaded inserts
Included Accessories non magnetic screw driver 1 brush 2 washers 4 pairs of mounting screws: 5mm, 8mm, 10mm, 12mm 1 plastic protector
You can check your conversation between the seller and you in
My Messages. Keep yourself safe. Always meet in person and never send or wire money.
Click here to learn more.