SSWS6.2 SOLDER SLEEVE WIRE SPLICES 6.5X6.2X40MM YELLOW

DESCRIPTION

FEATURES

Solder sleeve wire splice is a low-cost easy installation cable joiner. It consists of transparent heat shrinkable sleeve and fluxed solder that melts around the cable when heated up to provide insulation and make cable waterproof.Simply join two cables together and slide the middle of solder sleeve on the contact point. Use a heat gunto melt heat shrink and solder until it contacts closely with cable jacket.

In-line wire splices
Fully recovery temperature: 130°C
Temperature of fully solder melt: 150°C
Model Color Before Shrinking(mm) After Shrinking(mm) Solder Ring Total Length(mm)
Gap Shrink Thickness Gap Thickness Gap Thickness Length
SSWS1.8 White 2.0±0.1 0.3±0.05 1.1±0.1 0.5±0.05 1.8±0.1 0.3±0.05 1.6±0.1 25±0.5
SSWS2.9 Red 3.2±0.2 0.38±0.05 1.5±0.1 0.55±0.05 2.9±0.1 0.45±0.05 3.0±0.1 40±0.5
SSWS4.6 Blue 5.0±0.2 0.4±0.05 2.6±0.1 0.78±0.05 4.6±0.1 0.48±0.05 4.2±0.1 40±0.5
SSWS6.2 Yellow 6.5±0.2 0.4±0.05 3.0±0.1 0.8±0.05 6.2±0.1 0.5±0.05 4.3±0.1 40±0.5

 

 

Example of solder sleeve to cable sizes(as 16/5/17):

Category
Type
Code
AWG
Solder sleeve
Marker
Data
Cat5e
05062805
24
SSWS1.8
White
Data
Cat6
05062825
23
SSWS1.8
White
Data
Cat6A
05062912
23
SSWS1.8
White
Intercom
KBwire
05061974
19
SSWS1.8
White
Security
4 core
05062008
7x0.2
SSWS1.8
White
Power
Figure8
05093003
24x0.2
SSWS2.9
Red
Speaker
41 strand
05101041
18
SSWS4.6
Blue
Speaker
Medium
05101090
16
SSWS2.9
Red
Speaker
Blustream
05107072
16
SSWS2.9
Red
Speaker
Medium
05101110
14
SSWS2.9
Red
Speaker
Heavy
05101150
12
SSWS4.6
Blue
Speaker
DOHQ
05109015
17
SSWS6.2
Yellow
Auto
4mm
05040379
26x0.3
SSWS4.6
Blue
Auto
6mm
05040390
10
SSWS4.6
Blue
Trailer
7 core
05041201
9x0.3
SSWS2.9
Red
Hook up
Thin
05081220
21x0.08
SSWS1.8
White
Hook up
Medium
05082020
7x0.25
SSWS1.8
White
Hook up
Thick
05084000
24x0.2
SSWS2.9
Red

OVERVIEW

Solder Sleeve Wire Splices Install Instruction The easy to install and inspect, waterproof, single-piece Solder Sleeve Splice is the perfect solution in either an industrial setting or any home D.I.Y situation. Below is a basic step by step guide to solder two wires together, usingthe Solder Sleeve Splice and a heat gun, to create a solid and protected single connection. 1.  With the Solder Sleeve already on one of the wires, peel and expose each end of the two wires to a suitable length for joining. 2. Join both ends of the two exposed wires together, as pictured below, ensuring both ends are thoroughly connected. 3. Move the Solder Splice down the wire over the joining ends, making sure the solder centre of the sleeve covers the exposed joint, as pictured below. 4. Using a heat gun and starting from one end, heat the Solder Sleeve and slowly move along the splice till you have heat shrunk the entire length. 5. Be careful to heat shrink the whole Solder Sleeve without overheating it. 6. The finished Solder Sleeve should look like the completed wire splice pictured below. Now you can enjoy your two joined wires, as a single, strong and waterproof cable.
Weight: 0.0010 kg
Barcode Number: 9328202026255