WMI18B BLACK WALL MICROPHONE INPUT 45X45 MM- TERMINAL BLOCK

DESCRIPTION

WMI18B
BLACK ACTIVE AUDIO TRANSCEIVERS XLR

 

The WMI are flush mountable Wall Microphone Input Units, which can be integrated into several kinds of installation materials for system integration.

They are fitted with a Female XLR input connector on the front side and a terminal block connector on the rear side.

The signal which is applied to the input connection is converted to a differential signal with increased voltage levels.

This way, the signal is made insensitive to interference and noise and can be transferred over a long distance without any loss of quality.

This allows reliable signal transmission up to 300 metersover CAT5E (or better) twisted pair cabling.

A jumper on the rear side allows enabling of 15 Volts phantom power.

It should be used in combination with a matching device on the receiver end.

VARIANTS
WMI18/B - Wall microphone input unit (45 x 45 mm)
WMI18/W - Wall microphone input unit (45 x 45 mm)

 

SYSTEM SPECIFICATIONS
Cabling
UTP CAT5E (or better)

Max. cable length
300 m

Phantom Power
12 V DC

Inputs
Connector XLR female connector

Outputs
Type 4-pin Euro Terminal Block (Pitch - 3.81 mm)
Signal Mono audio transfer
Level Differential with increased Voltage levels

Power
Consumption 0.95 W - 40 mA / 24 V
PRODUCT FEATURES
Dimensions
45 x 45 x 50 mm (W x H x D)

Construction
ABS

Mounting
45 x 45 mm (Audac / Niko / Legrand)

Colours
Black (RAL9005) (WMI18/B)
White (RAL9010) (WMI18/W)

 

Product information Sheet PDF file
Barcode Number: 5414795029262