New Dyson Airblade Hand Dryer Tap Wd06 Wall Mount - Satin Nickel 312Mm W X 303Mm - Dyson - MDW-10833-59276

DESCRIPTION

Key Features: This new model is quieter than the old AB11 model Improve your washroomâs safety: drying your hands at the tap means there is no need to move to a separate drying area, thus avoiding dripping water on the phone 14 second drying time Hygienic Costs less to run (vs hand towels) Reduce your impact on the environment 77% less expensive to run than other hand dryers HACCP accredited and Carbon Trust certified Product Data: Electrical â Input voltage: 200-240V Frequency: 50-60 Hz Decibel level: 81db Rated power: 1,000 W Motor type: Dyson digital motor â V4 brushless DC motor Motor switching rate: 5,400 per second Motor speed: 81,000 rpm Operating temperature range: 0deg â 40degC Heater type: None Standby power consumption: Less than 0.5 W Construction - Tap construction: Stainless steel (brushed) Under counter motor assembly construction: Moulded ABS (main unit) Exterior screw type: Torx T15 Water ingress protection to IP35 Filter â HEPA filter (glass fibre and fleece prelayer) Bacteria removal 99.95% of particles the size of bacteria Operation â Touch-free infra-red activation Hand dry time measurement: 14 seconds (Measurement based on National Sanitation Foundation Protocol P.335) Operation lock-out period: 30 seconds Airspeed at apertures: 430 mph Operating airflow: Up to 21 l/s Water operation â Water flow rate: 4 l/min Tap Aerator: Aerated water outlet Tap power supply: Mains supply Water temperature control: Thermostatic mixer recommended (not supplied) Water pressure required: 1-8 Bar Logistics - Net weight: 4.6kg Packaged weight: 6.1kg Tap dimensions: 312mm W x 303mm D Motor bucket dimensions: 262mm H x 141mm W x 189mm D Minimum 100mm installation clearance from floor Packaged dimensions: H276 x W437 x D280 mm Sink specification â The Dyson Airblade Tap is compatible with most sink types. Ensure plugs are not installed in the sinks. Sink dimensions: All sink measurements are internal unless stated otherwise. Width of sink â Minimum: 350mm, Front to back â Minimum: 300mm, Depth of sink â Minimum: 100mm Maximum depth of sink for AB10 only: 200mm (External measurement of vessel sink). Sink materials: Sinks with highly polished surfaces should be avoided e.g. shiny chrome. Porcelain or brushed metal are ok to use. When multiple taps are installed side-by-side, tap centres should be a minimum of 580mm apart. Standard Guarantee/Warranty: 5 year guarantee

Brand: Dyson
MPN: MDW-10833-59276