7×5 MODERN DLX ITS S/AXLE TRAILER (CAGE OPTIONAL)

DESCRIPTION

Features:
“Crafted with pride in our Adelaide factory at Lonsdale since 1990.”750kg ATM Load RatingROLLED CHECKER PLATE BODY WITH 350MM HIGH SIDES
- HEAVY DUTY CHASSIS 50×50 SHS
- DRAW BAR 75X50
- CAGE INSERTS FITTED ON EACH CORNER OF THE SIDES 50X50 SHS
- SKID RAILS (DESIGNED FOR EXTRA STRENGHT & PROTECTION)
- FRONT & REAR OPENING CHECKER PLATE TAILGATE WITH TIE RAILS
- SWING HANDLES TO SECURE THE TAILGATES WITH  RUBBER SLEEVES
- DOUBLE FOLDED CHECKER PLATE GUARDS FOR A  MODERN LOOK
- FULL LENGTH SIDE TIE RAILS
- SPARE WHEEL HOLDER MOUNTED ON THE DRAW BAR
- SLIPPER SPRINGS (UNBAKED ONLY)
- ADVANCED – INDEPENDENT TORSION SUSPENSION (ITS)
- 50MM COUPLING
- LED 12/24V LIGHTS WITH 7-PIN FLAT PLUG (ALL JOINS SOLDERED)
- FRONT & SIDES REFLECTORS
- LARGE MUDFLAPS 300X230MM
- SWING UP JOCKEY WHEEL
- BRAND NEW 14” SUNRAYSIA RIMS WITH 185C NEW TYRES
- BODY SCRAPED CLEANED & WASHED, EXTERIOR JOINTS SEALED TO PREVENT MOISTER
- THE COMPLETE TRAILER INCLUDING THE CHASSIS ETCH PRIMED & THEN FINISHED WITH A TOP COAT OF HIGH QUALITY POLYTHANE 2-PACK PAINT WHAT IS ITS SUSPENSION: INDEPENDENT TORSION SUSPENSION ITS axles have a straightforward, attached construction with a torsion suspension system. Four rubberized cords are inside the axle housing which handle suspension travel and shock absorption. In addition, this system offers trailer rigidity as the axle is bolted to the trailer frame.BENEFITS:The main advantages of a torsion bar suspension are soft ride due to elasticity of the bar, durability, and small profile along the width of the vehicle.ADVANTAGES:Smother ride & lower more ground clearance:
- Self-damping action and independent suspension, ITS delivers a smooth, quiet ride like no other – adding up to an improved towing experience. Also, by bolting the axle up close to the chassis this give more ground clearance than traditional spring & axle setup.Lower Maintenance:
- Except for periodic inspection of the fasteners used to attach the ITS axle to the Trailer frame, no other suspension maintenance is required on ITS axles. They are, of course, subject to normal maintenance and inspection procedures regarding brakes, hubs, bearings, seals, wheels and tyres.Traditional leaf springs, axles and all the componentry may fatigue over time and break whereas the ITS suspension has less componentry eliminating this issue. Pictures displayed are for illustrative purpose only & may show more or less features that are fitted standard Â

-Specifications:
ATM UPGRADE PACKAGE1400kg – 1600kgupgraded draw bar Upgrades suspension Brakes fittedDIMENSIONS 750kgSIDE HEIGHT350FLOOR HEIGHT530OVERALL HEIGHT880INSIDE LENGTH2100INSIDE WIDTH1520DRAW BAR LENGTH1250OVERALL LENGTH3350OVERALL WIDTH2030Important Note:ATM upgrades will change the heights & widths of the trailers

-