Peugeot 308 HDI SW 3rd Row Rear Seat

DESCRIPTION

This single 3rd row seat was purchased for my 2009 T7 308 SW station wagon / estate. but it also fits a variety of other Peugeot station wagon 7-seat models which take 3rd row seats. This seat is in good condition with no damage, fading or tears, a wipe with Armoral and it would look new. In the upright position, the seat stands about 66cm high from floor to top of retracted head rest, and 80cm when the adjustable head rest is fully extended for taller passengers. When folded, the seat measures approx. 63cm deep from front to back, 50cm wide across the seat, and 20cm high from floor to the top of the folded back seat. In this folded position, the seat provides a flat surface to place groceries etc on. The seat has a seat belt anchor either side of the seat so it can be installed on either the drivers side, or the passengers side of the car. The seat hooks into floor anchors at the front of the seat, and by 2 spring-loaded pins at the back that lock into anchor holes under the plastic covers in the car floor. Distance between rear floor pins / anchor holes is about 305mm centre to centre; the pins are about 350mm behind the front floor anchors; the floor mounting anchor hole spacings will be standard. The seat can be folded flat then pushed against the back of the 2nd row seats. The seat is removed by pulling a release strap to fold the seat flat then it can be easily removed from the car. Happy to send more photos on request. Due to weight and size of the seat, pickup from Ryde 2112 is recommended so you can test the fit of the seat in your car. Buyer can also pay for the seat then arrange their own courier pickup from my house in Ryde 2112 at their own expense if they cant pick-up in person. For transport, the seat when folded measures about 52cm x 62cm x 20cm and weights about 16kg.