GPT NEW GO KART CENTRIFUGAL AUTOMATIC CLUTCH 3/4

DESCRIPTION

This clutch is standard on all of the Drift II Go Kart Buggies on the market. This clutch has a 19mm bore so it will suit  engines with a 19mm shaft on the standard 5.5hp or 6.5hp petrol engine. The drive sprocket has 10 teeth. This clutch is to suit Pitch #50 chain and sprockets. If your unsure of the pitch of your chain if being used for a different machine please see chart below.



Outer Diameter: 107.3(mm)-4.22inches
Size of Keyway: 5(mm)-0.2inches
Diameter of Central Hole: 19.1(mm)-0.75inches
Overall Height: 54.7(mm)-2.15inches
Sprocket Diameter (Tip of Tooth to Tip of Tooth): 45.8(mm)-1.8inches



Fits all styles of this popular GoKart which is also known as the Kazuma Maxx Drift, Zoom kart, Funbikes Go Kart, Drifter Kart 2, Drifta Kart, Monster Gokart, Drift Kart 11 and many more

Drifter Gokart 160cc and 200cc clutch and drive sprocket.

This brand new clutch is a commonly used clutch / Clutch drum and drive sprocket combined. Its found on many engines that look similar to the Honda generator style engine. The diameter of the central hole is 19mm. There are different sizes so please check yours carefully. This is a serviceable unit incorperating a circlip to hold the sprocket in place which in turn holds the drum in place around the shoes. The sprocket fits a 420 chain.

Key Features

Central hole comes with a Woodruff key to make sure the clutch is secure and easily fitted to the key-way on your crankshaft

It is classed as a heavy duty part with strengthened shoes

Comes complete with heavy duty sprocket which has 10 teeth



Which machines do these parts fit?

This clutch will specifically suit 160cc Drifter go karts. As the clutch has a fixed woodruff key within the cental hole, it will only fit crankshafts that have a corresponding key-way. Many Chinese parts crossover to fit other engines so please check the dimensions to confirm its suitability for other models.

BRAND NEW CENTRIFUGAL CLUTCH WITH DRIVE SPROCKET

This clutch is standard on all of the Drift II Go Kart Buggies on the market. This clutch has a 19mm bore so it will suit  engines with a 19mm shaft on the standard 5.5hp or 6.5hp petrol engine. The drive sprocket has 10 teeth. This clutch is to suit Pitch #50 chain and sprockets. If your unsure of the pitch of your chain if being used for a different machine please see chart below. Because we have the Go Karts for sale many people kept asking where they could get spar parts for their;s, so we thought we would list some spares.

Check out the picture below to find out what chain size you have.



CHAIN DIMENSIONS



Chain Number

Pitch

Between Inner Plates

25

1/4;

1/8;

35

3/8;

3/16;

40

1/2;

5/16;

41

1/2;

1/4;

50

5/8;

3/8;