CRUISEMASTER SLIDE STAND V2 CMTJS2T

DESCRIPTION

Introducing the Cruisemaster™ Slide Stand (V2), a top-rated solution for your lifting needs. Boasting a 2.0T rating, this jack stand comes pre-fitted with a bolt-on bracket, ensuring easy fitment for all users.
For those who prefer welding, the pre-fitted bolt-on bracket can also be directly welded to the drawbar. For the best results, we strongly recommend that you prepare the weld area by removing the SA5 finish prior to welding.
Designed with a full 6TPI ACME load-bearing thread and automotive-grade taper roller bearing, this stand offers support in both axial and sideways directions, making it sturdy enough to be specified by Councils and Mines, while still being light enough to withstand wind conditions. The stand handles are fully sealed with an O-ring and include a grease nipple on top for lubrication, ensuring a long and trouble-free life for the mechanism. Each stand is fully SA5 plated, and the slide mechanisms contain stainless steel components. For those looking for an additional boost, an optional steel wheel assembly is available with a dynamic rating of 500kgs.
Advantages

Rated to 2.0T
Pre-fitted mounting bracket
375mm vertical slide range
270mm winding lift (stroke)
SA5 coated with stainless steel components
5 Year Warranty

Included

1 x Cruisemaster Sllide Stand

Slimline stands have a 2 tonne static / lifting load limit. This is the load that is capable of being lifted with the trailer stationary on firm and level ground with the stand installed as per Cruisemaster specifications.
When a Slimline stand or swivel combination is fitted with a Slimline jockey wheel (51S 102) the stand has a maximum dynamic load of 500kgs. This figure is a guide only and is based on moving a trailer on firm and level ground. Ultimate strength will depend on drawbar strength, surface condition, usage etc. Using the Slimline Jockey Wheel raises the stand by approx. 175mm