This ad is on hold, please check again later.

AC/DC 48V 20A Lithium ​LiFePO4 Battery Charger

$502.00
SUMMARY
Amptron AC/DC 48V 20A Lithium ​LiFePO4 Battery Charger AMPTRON® Lithium Iron Phosphate (LiFePO4) battery chargers...
DESCRIPTION
Amptron AC/DC 48V 20A Lithium ​LiFePO4 Battery Charger

AMPTRON® Lithium Iron Phosphate (LiFePO4) battery chargers are state-of-the-art battery chargers with a charging profile specifically designed to charge and maintain Lithium Iron Phosphate (LiFePO4) batteries, and can safely achieve a 100% State of Charge.

The 48V 20A model charger operates from mains AC 200-260V as input, supplying up to 20A charging output suitable for nominal 48V LiFePO4 battery banks. The charger's built-in protection technology provides protection against Over Voltage and Over Current output, Short Circuit and Reverse Polarity making it very safe to use.

Specifications
Detailed information of AC/DC 48V 20A Lithium ​LiFePO4 Battery Charger:
Item

Specification

Description/Remark


Model

AT-240-4820ALFPV01

AC/DC ​48V 20A LiFePO4 Battery Charger


Input Voltage

min 200Vac to max 260Vac

   


Input Power

Max 1450W

  


Constant charge voltage

Vdc min 58.1V to max 58.7V

   


Constant charge current

Min 19A to max 21A

  


Charge complete current

Vdc min 1.2A to max 1.8A

  


Ripple voltage

650mV

   


Efficiency

85%

At full load  


Product Dimensions

L-260mm x W-175mm x H-90mm

​


Weight

3.5Kg
 
WARRANTY
MANUFACTURER'S LIMITED WARRANTY:    
AMPTRON® warrants each AMPTRON® branded battery charger sold by AMPTRON® or any of its authorised dealers or distributors worldwide, to be free of defects from the date of sale for 2 years. The warranty period starts at the time of purchase. If the original receipt is lost, the warranty will be based on the product date code. The warranty covers failure due to defects in material or workmanship. Subject to the issues listed below, AMPTRON® will repair or replace the battery charger and/or parts of the battery charger if the components in question are defective in materials or workmanship.  
Warranty Procedure:
In the unlikely event your battery charger fails, we will arrange to get it back to one of our labs  to assess the battery charger and determine the cause of failure to see if it is repairable. If the battery charger is repairable, it will be repaired at no cost and returned to you. If it is not repairable and the issue was caused by a manufacturer defect, we will replace the battery charger at no cost. Warranties are non-transferrable and stay with the original purchaser of our products.
Not Covered by This Warranty: 
Manufacturer is not obligated to warrant the AMPTRON® battery charger in question, if defects are related to damages caused by abuse/neglect, or from the following: - Damage from shipping, loose terminal bolts or corroded hardware - Manufacturer codes tampering or removal - Failure to properly install the battery charger - Breakage from collision, fire or freezing—which includes damage from extreme heat or cold, improper storage, water damage. All bolts must be firmly tightened with a torque wrench and NOT by hand to avoid overheating caused by a loose connection. The warranty does not cover consequential damage or injury, discharged batteries, rental, freight, labour or administrative costs. Warranty replacement or repair will only occur after the battery charger is returned to base, tested and failure deemed to be a genuine claim.
Non- AMPTRON® Warranties: 
 AMPTRON® authorised dealers and distributors may offer an additional warranty to the Manufacturer’s Limited Warranty. Manufacturer is not responsible for dealer or distributor created warranties or any claims that may arise from said warranties.
Warranty Disclaimer: 
Customers should adhere to all AMPTRON® documentation and guidelines.  Manufacturer will not be responsible for any expenses related to installation/removal, electrical system tests, battery charging, loss of time or other expenses which should be considered incidental damages, including all shipping charges after the first 30 days of warranty. 
There are no returns or exchanges accepted. Our zero return policy is effective at the time of purchase. As always, our commitment to excellent customer service is our top priority. Please contact us if you have further questions about our warranty and return policy. PLEASE NOTE - Customers are responsible for all shipping fee's following the first 30 days of purchases.
Â
-
SKU:AT-240-4820ALFPV01
ADDITIONAL INFORMATION
Price
$502.00
Condition
New
Delivers To
Australia Wide
YOU MAY ALSO LIKE
Shepherds Hook Weight Distribution system 3

Shepherds Hook Weight Distribution system

Shepherds Hook Weight Distribution system
$100.00
Yesterday
Bathurst , NSW
Used
Stabiliser bars 7

Stabiliser bars

Stability stands
$120.00
Yesterday
Werribee , VIC
Used
Opens partner site or view on Tradingpost
Opens partner site or view on Tradingpost
Opens partner site or view on Tradingpost
Opens partner site or view on Tradingpost
Opens partner site or view on Tradingpost
Opens partner site or view on Tradingpost
SHARE
THIS AD
Back to Top