Amptron 24V 100Ah Lithium LiFePO4 Battery 100A BMS Prismatic Cell Balancing

DESCRIPTION

Amptron 100Ah 24V Lithium LiFePO4 Battery

4 Year Australian Manufacturer Warranty

AMPTRON 24V 100Ah Lithium LiFePO4 Batteries are an alternative replacement (AR) for any application currently using a Deep Cycle Gel, AGM or Flooded Lead Acid battery. The maximum continuous discharge current is 100A and peak discharge current 200A for 5 seconds.

Our Lithium batteries use a high quality robust integrated Battery Protection System (BPS) and is designed to manage and control all the battery protection requirements. The BPS maximizes the performance of the battery by automatically balancing the cells and protecting them from being over charged or over discharged. Our integrated BPS design is what allows our batteries to be used as an AR "Alternative Replacement" for any application requiring durable, high quality, dependable and lightweight Lithium Batteries.
Features:
High energy density, more usable energy in less space
Light, compact & portable
Can safely use 100% of rated capacity vs 50% for Lead Acid
Built to service higher loads without loss of capacity (Peukert’s effect)
The flat discharge curve means longer run time & more efficient use of capacit
Energy efficient
Heavy Duty - Built in Battery Protection System
AMPTRON lithium batteries use a high quality robust built-in Battery Protection System (BPS) designed to prevent damage to the cells from almost any external accidental occurrence that would normally cause damage. The internal BPS will automatically disconnect to prevent damage to the cells if the battery drains below 10 volts. It will automatically reconnect when the charger is turned on. This protects the battery from over-discharging and damaging the cells. This technology also protects the battery from short circuit and reverse polarity.
 
Internal Features:
Low Voltage Protection Switch - Automatically disconnects at 10V
Over Voltage Protection Switch - Automatically disconnects at 14.6V
Short Circuit Protection Switch - Automatically disconnects
Reverse Polarity Protection Switch - Automatically disconnects
Internal cell balancing   - Automatically balances cells
Charge Balancing - Independent balancing for multiple batteries connected in parallel or in series.
This Battery Protection System is designed to last throughout the life of the battery and provide reliable power for thousands of cycles.

CELL BALANCING
The BMS balances the cells by sending more current through the length way circuit boards and into cells with a lower voltage. The BMS will also discharge cells that exceed 3.65V during charging.

THERMAL FUSE
Internal Cell Safety Fuse
Our latest cell technology is manufactured with a internal thermal safety fuse between the anode and cathode that will break and disconnect in the unlikely event the cell would begin to overheat.
 
SAFETY VENT
High pressure safety vent
Each cell has a high pressure safety vent that will flip open to release energy and prevent explosion.
 
ELECTROLYTE
Flame Retardant Electrolyte
Our cells are manufactured with our patented flame retardant additive in our electrolyte.
 
EXPLOSION PROOF
Explosion proof Nickel plated steel
Every AMPTRON® cell is manufactured in our explosion proof Nickel plated steel Prismatic case.
 
Specifications
 
Specification

Description/Remark


Model

AT-LFP-24-100AV01

24V 100Ah Lithium LiFePO4 battery


Chemistry

Lithium Iron Phosphate (LiFePO4)

   


Battery dimensions

L-370mm x W-190mm x H-245mm

L x W x H  


Weight

23kg

   


Cell type

3.2V 100Ah Prismatic cells

  


Battery module

8 pcs 3.2V 100Ah cells, 1 parallel strings of 8 cells in series

  


Casing material for single cell

Nickel plated steel

   


Standard capacity（0.2C5A）

24V 100Ah / 2560Wh

  


Cycle life

> 2000 cycles at 100% Depth of Discharge (DoD)

Under normal usage where the DOD is


Rated voltage

25.6V

Working voltage per cell: 3.2V


Charge voltage

28.8 V

Max. charge voltage per cell: 3.60V


Cut-off volate

2.5V for lowest cell, Nominal 20V

Cut-off is triggered when the first cell reaches 2.50V


Depth of discharge (DoD)

100%

Batteries can be discharged to 100% of the rated capacity


Optimum charge current

20A (0.2C5A)

Cell max voltage﹤3.9V


Charging time

Approximately 5 hours

When charging from low voltage cut-off point


Charge current range

20A (0.2C5A) to 100A (1C3A)

Cell max voltage


Rapid charging

Max. charge current 100A (1C3A)

Temperature increase falling within 15°C is normal. Over 15°C will affect the service life of the cells.


Max continuous discharge current

100A

1C


Peak discharge current

200A

2C (10 seconds)


Discharge performance in normal temperature

20A (0.2C3A) ≥ 100
1C3A ≥90％

   


Operating temperatures

Standard 0℃～45℃
Discharge -20℃～65℃
Storage -20℃～45℃

   


Impedance (Max, at 1000Hz.)

≤ 20mΩ

   


Storage performance

Capacity can be kept ≥ 80% in storage for 12months

Battery should be kept at -20℃ ～ 45℃ where it’s dry, clean and well-ventilated.
-
SKU:AT-LFP-24-100AV02