ArkPak AP730P Pure Sine Portable Battery Box + 100Ah SolarKing Lithium Battery

DESCRIPTION

ArkPak 730P Pure Sine Portable Battery Box + SolarKing 100ah Lithium Battery
240V and 12V Portable Power - anytime, anywhere - Battery management system and a dual-battery system all in one.

Better yet, you can now run and recharge your most sensitive devices such as drones, cameras, studio gear, computers, laptops and even Bi-PAP/CPAP machines - giving you more freedom to be creative, stay connected and tour in safety!

The only Portable battery box on the market with 7 Stage AC & DC Charging built in

Battery compatibility: Lithium LiFePO4, Gel, Calcium, AGM & Lead acid

The ArkPak seven stage smart charger is based on an advanced software program that monitors your battery. It’s designed to regulate the charge to the internal 12V battery throughout its life just by leaving it plugged in at home. So you don’t have to worry about checking the battery every few hours, the ArkPak has a Time Tracker function. It’s essentially an on-board microprocessor that constantly assesses the state of the battery. It tells you both the percentage of battery remaining, and the number of hours until it’s full during charging via an interactive LCD screen

Smart charge will select from the following cycles to optimise your battery’s performance.

Stage 1: Testing - Checks the battery capacity when the ArkPak is first turned on and predicts the hours left until fully charged.
Stage 2: Charge - commences recovery of battery back to peak voltage. Charges the battery up to a set voltage at which point the battery is approximately 95% charged. Please note if you are using an external charging source (e.g. solar panel) the screen will show “external cycle” after a few minutes of charging since the internal smart charger is bypassed.
Stage 3: Bulk - Period just before boost when volts are constant.
Stage 4: Boost - Peak charge for maximum performance. Battery is charged for 1.5 hours at constant voltage. At the end of boost the battery is 100% charged.
Stage 5: Resting - Allows the battery to consolidate after boost. The ArkPak ceases charging and allows the battery to rest while allowing voltage to drop to float voltage.
Stage 6: Float - Maintains performance and prolongs battery life. Battery is continually monitored and voltage is maintained at 13.5V (13.7V for lithium iron phosphate) by automatically adjusting charge current for 500 hours.
Stage 7: Re-Awaken - Exercising the battery and avoiding sulphation build-up. After 500 hours of conditioning the charger automatically returns to charge cycle.

Charging the Battery using Solar Panels (not supplied) You can charge the battery via the external terminals using a solar panel array. To do this the isolator switch must be in the ‘on’ position. The smart charge PCB will be bypassed with this configuration so there will be no control over battery voltage. It is important to use an external voltage regulator (not supplied) when using solar panels. The main data screen will show “external cycle” after a few minutes of charging. In this case the time left figure is not displayed and the normal charging stages are bypassed.

Charging the Battery with an External Charger using the External Terminals or Accessory Sockets Connecting the battery via the external terminals or accessory sockets to an external charging source can be done as long as your charging source is regulated. The reason is because this method bypasses the internal smart charger. The main data screen will show “external cycle” after a few minutes of charging in this case.

The ArkPak AP730P is compatible with all 4WD batteries, including lithium, lead acid, calcium, gel and AGM of up to 130Ah in size. A time-saving feature is the easy step-by-step guide that takes you through the new battery set-up process, remembers the last battery you used, and will warn you if there’s a fault with the battery. Once you’ve dropped in your battery, ARK tells us you’ll get up to three days of continuous 240V power, or up to seven days of 12V power from a 130Ah deep-cycle battery based on the power consumption of a 37L fridge/freezer.

If you’ve got someone in the family who simply won’t leave home without their slice of technology, the Arkpak AP730P has a built-in 300W PURE SINE WAVE inverter provides 240V power without the need to run an external inverter or additional cabling. Power is delivered through the 240V mains socket, two 12V cigarette lighter ports, a 5V USB connection, external high-current terminals or via the 50A Anderson plug, all of which can be used simultaneously.

A beaut feature for those struggling to find room for a second battery under your bonnet is the now inlcuded DC-DC 12V Car Charger that lets you charge up and run your ArkPak via your vehicle’s 12V lighter socket. What this means is you can charge your ArkPak using the 4WD’s alternator just like a conventional dual-battery system.

AP730P Features:


Built-in 7 amp AC & DC 7 stage smart charger. 
Built-in 300 pure sine wave inverter & 240V socket
2 x 10 amp 12V accessory ports
1 x 50 amp Anderson Plug
1 x 5 Volt  USB Port
Isolator Switch
2 x Protected external high current terminals
Time tracker technology with LCD Screen 
Strong easy carry handle
Technical specifications:
Weight: 4.62kg
External dimensions: 240mm wide x 440mm long x 327mm high
Internal dimensons: 180mm wide x 334mm long x 238mm high
SolarKing 100Ah Lithium Battery

New compact case design - At only 334x175x219mm in the Arkpak, Engel & Hulk Portable Battery Boxes.

SolarKing lithium batteries are the future of battery storage. 3YR WARRANTY and can be connected in Series or Parallel. SolarKing Lithium batteries are fully sealed with a built in battery management system (BMS) to make sure the battery operates safely. Perfect replacement or upgrade for a traditional lead acid batteries and the life of lithium batteries is up to 3-4 times the life of lead acid batteries. Lithium batteries have a much greater depth of discharge capacity and are less than half the weight of equivalent capacity lead acid deep cycle batteries.

Perfect for use in caravans, marine, camping and home storage applications. The batteries are fully sealed and a built in battery management system for safety protection.

The Solarking CB-100-12-100 now features Active Cell Balancing. This balancing technique redistributes charge between battery cells during the charge and discharge cycles, thereby increasing system run time by increasing the total useable charge in the battery stack, decreasing charge time compared with passive balancing, and decreasing heat generated while balancing.

Solarking CB-100-12-100 Features:
100AH Lithium Iron
2000+ Cycles Minimun @ 100% Discharge
Built in advanced 100A BMS with active cell balancing on both charge & discharge cyle
Lightweight
Can be connected in Series or Parallel


CB-100-12-100 Specifications:
CB-100-12-100 Specifications:
Dimensions 334x175x219mm
Chemical: Lithium Iron LiFePo4
Product Weight: 11.14kg
Cell Type: Cylindrical
Cell Model: 32131
Operating Temperature Range: -20°C ~ +60°C
Voltage 12.8VDC
Amperage 100AH
Max Discharge Rates 1C
Max Continuous Current 100A
Max 3 Second Pulse 150A
Min Charge Current 1A
Nominal Charge Current 30A
Max Charge Current 100A
Max Charge Voltage 14.8V
Cell Balancing: 3AH charge & discharge
Cycles @ 100% DOD 2000 Cycles
Cycles@ 80% DOD 3000 Cycles
Cycles@ 50% DOD 3500 Cycles
Cycles@ 30% DOD 8000 Cycles
Low Voltage cut out: 10.0VDC
Maximum In-series voltage: 30.4V
Terminal T8
BMS Reconnect: Automatic
Certifications: RCM, CE, EMC, UN 38.3
-
SKU:AP730P-100AhLithium