DX27™ Clamshell Rooftop Tent

DESCRIPTION

All Products DX27™ Clamshell Rooftop Tent

DX27™ Clamshell Rooftop Tent
$5,250.00

The DX27™ Clamshell Rooftop Tent was designed and manufactured in South Africa and brings together The Bush Company’s many years of experience in aluminium fabrication. From The Bush Company’s first hand experience in touring/camping the DX27™ is an innovative product that sets new benchmarks in quality, practicality and reliability.

Industry leading features include an extruded and welded aluminium alloy frame, a large rainfly at sides and rear, full length roof mounting rails, plus the convenience of setting up/packing down in under 90 seconds,

Whether you are looking for your first rooftop tent or upgrading your existing setup, the DX27™ Clamshell Roof Top has a number of unique features that will leave you knowing that you made the right choice. The key features of the DX27™ are below and the full details are listed in the product specification tab below.

Freight and installation fee NOT included

Add To Cart
Accessories

There are a range of brackets available for fitment of accessories including:

Heavy Duty Awning brackets for mounting awnings directly to the sides of the tent.

Solar Panel Brackets for mounting solar panels to the roof of the tent.

Lightbar/Spotlight Brackets

Shovel Bracket for either long/short handle shovels or axes

Hi-Lift Jack Mount Bracket

Fan Bracket to mount a Sirocco fan to internal roof.

Universal Roof Load Bars to attach to the roof rails on the tent.

MAXTRAX Load Bar Bracket for mounting up to 4 recovery tracks on the roof

MAXTRAX Side Mount Bracket for mounting up to 4 recovery tracks on the side of the tent

Outstanding Features

External Length: External Frame 2.25m /7′ 4.6″ (2.32m / 7′ 7″ inc hinges & handles)

External Width: External 1.4m (4′ 7.1″), 1.45m (4′ 9″) including gas struts

Height (exterior, closed): 278mm (10.94″) including roof rails and base extrusions

Max Height (exterior, open): 1.45m (4′ 9″)

Max Height (interior, headroom open): 1.4m (4′ 7″)

Internal Mattress: Length 2.13m / 7′, Width 1.28m / 4′ 7″, Thickness 70mm / 2.76″

Weight: Approximately 94Kg (207lbs) excluding telescopic ladder

2.6m Telescopic ladder, second ladder mount and universal fitting kit/brackets supplied as standard

DX27™ Clamshell Rooftop Tent – Product Specifications

External Length: External Frame 2.25m /7′ 4.6″ (2.32m / 7′ 7″ inc hinges & handles)

External Width: External 1.4m (4′ 7.1″), 1.45m (4′ 9″) including gas struts

Height (exterior, closed): 278mm (10.94″) including roof rails and base extrusions

Max Height (exterior, open): 1.45m (4′ 9″)

Max Height (interior, headroom open): 1.4m (4′ 7″)

Internal Mattress: Length 2.13m / 7′, Width 1.28m / 4′ 7″, Thickness 70mm / 2.76″

Weight: Approximately 94Kg (207lbs) excluding telescopic ladder

Universal fitting kit/brackets included with tent.

Large canvas removable one piece rainfly at rear and sides of the tent with heavy duty 8mm spring steel poles and adjustable storm straps for heavier wind conditions.

Air vent above rear entrance with midge mesh and zipped canvas flap on inside.

Fully seam welded lightweight alloy frame with high quality powder coated finish.

2m (6′ 6.7″) long cargo rails welded to the top of the roof, suitable for attaching accessories or the optional roof load bars .

Internally reinforced roof, load rated to 200Kg (440lbs) when roof closed, or 50kg (110 lbs) when open.

‘Ezi-Slots’ extruded into the sides of base and top frame for easy attachment of accessories such as awnings, hi-lift jacks, light bars etc.

All three layers at entry points use YKK zippers: external canvas storm door, high quality midge mesh and internal canvas door.

Three entry point to tent, rear, left and right side.

Internal movable battery powered LED light (shines white, yellow or red) – note, tents ordered prior to November 2021 have a hard wired LED light.

Electrical power box with twin USB, CIG Socket plug, mounted to internal roof, with resettable thermal fuse.

External 50 amp anderson plug mounted to underside of tent at hinged end on left side for connection to vehicles power.

12cm (4.7″) of storage space above mattress when tent closed, so plenty of room for bedding, pillow, fishing rods, rifles etc.

3 storage pouches on inside of roof, and 1 large pouch on each side at hinged end.

70mm / 2.75″ thick mattress super high density foam with removable zipped canvas cover.

Thermal marine carpet underneath mattress and carpeted internal roof liner.

Telescopic 2.6m (8′ 4.3″) aluminium ladder with attachment points at rear and sides of tent, supplied in canvas storage bag.

Two heavy duty 20mm (0.08″ high) aluminium extruded foot rails underneath tent with M8 slots on sides and base for easy mounting, set 1050mm / 41.34″ apart centre to centres joined by multiple 25mm thick sections of welded box tubing for additional strength and floor support.

2 Year conditional warranty.