Enerdrive ePOWER B-TEC 12V 125Ah G2 Lithium Battery DC40A -AC 40A Charger

DESCRIPTION

Enerdrive B-TEC 12V 125ah G2 Battery + DC-DC 40A & AC 40A Charger

Bundle contains the following items:

ePOWER B-TEC 12v 125Ah Lithium Battery Gen2
ePOWER 12v DC2DC40+ DC-DC Battery Charger
ePower 12V 40A AC Battery Charger EN31240

The latest G2 model B-TECH 125ah 12V Lithium Battery from Enerdrive now features an industry leading 5 year warranty and sees further design & functionality improvements and a handy purpose built battery tray & strap included with each battery



Smart Phone Monitoring System

The Bluetooth Wireless Battery Monitoring feature carries over to the whole B-TECH G2 Range, so you can monitor the following via your smartphone or tablet (Android & Apple Compatible)

Battery Voltage
Battery Current (Amps
Battery State of Charge (SOC)
Battery State of Health (SOH)
Battery Status
Individual Cell Voltage
Battery Temperature
Battery Cycles
Battery Alarms
Battery Event Information
Built-In Reset Button

A KEY improvement and a  brand NEW features for the Enerdrive B-Tech G2 LIthium Battery range is the  “Built-In Reset Button” making re-starting a flat battery a breeze. No longer do you need to apply a voltage to the battery terminals to wake up the battery. Press the button and within seconds, the battery will come back to life ready to accept a charge source to rejuvenate the battery.

Battery Management System

The other battery specifications remain relatively the same; battery weight, battery dimensions, max charge & discharge rates. The Prismatic Cell Design & Battery Management System (BMS) with Active Cell Balancing appears equal to the previous version. For those that don't know, the internal Battery Management System ensures safe and accurate operation of the battery. It monitors and optimises each Prismatic cell within the battery during normal operation. It will also protect the battery pack from over charge, over discharge, over temperature & short circuit.  

Industry Leading Warranty

5 Year Product Warranty & Lifetime Technical Support . They also promote a track record of near perfect resolve - Purchase any Enerdrive Product with peace of mind your covered by a company at the forefront of lithium battery systems in Australia.

EPL-125BT-12V G2 Specifications:
Amp Hours: (Ah) 125.0
Dimensions: 318mm (L) x 165mm (W) x 232mm (H)
Weight 15kg
Battery Voltage: 12V
Nominal Voltage: 12.8V
Nominal Capacity: 125Ah
Cycle Life: (DOD - 80% under controlled conditions) ≥ 2000 Cycles
Battery Charge Temperature: 0 - 45°C
Normal Charge Voltage: CV/CC* 14.20 - 14.60V
Standby (Float) Voltage: 13.50 - 13.80V
Maximum Charge Current: 60A @ 25°C for 30mins
Recommended Charge Current for Maximum Life: ≤ 20-60A
Battery Discharge Temperature: -20 ̴ 60°C
Battery Output Voltage Range: 11.00 - 14.60V
Maximum Discharge Current: 100A @ 25°C ± 5°C for 30mins
Pulse Discharge Current: 450A for 1.0s
Discharge Cut-off Voltage: ≤11.20V
Battery Manual Reset Button: Yes
Discharge Over Current: 110A for 30s – 450A for 1s
Protection Reset Time: Approx 10s Auto Release
Over Current Release Method: Disconnect Load
Battery Discharge Over Temp: Protection to 65°C ± 5°C Release at 50°C ± 5°C
Battery Charge Over Temp: Protection to 55°C ± 5°C Release at 45°C ± 5°C
Short Circuit Protection: Auto release after 5s
Self Discharge: ≤ 3% Per Month
Enerdrive 12v DC2DC40+ DC-DC Battery Charger / MPPT Solar Regulator

The Enerdrive ePOWER DC2DC+ Battery Charger is a fully automatic multistage, multi input battery charger with the ability to charge from either an alternator linked to a battery; or via solar power with the in built Maximum Power Point Tracking (MPPT) Solar Controller. With two inputs available, the main/house battery will be charged from either the engine while underway, or via the solar panels when stationary. The process to choose either engine or solar is fully automatic and both functions are controlled from within the unit itself without the need for external relays. Profiles to charge GEL, AGM, Flooded, Lithium and even full custom profiles are included

Features
Two totally independent DC Inputs for both engine and solar regulation charging one house battery bank output
DC M6 screw terminals that will allow for large battery cable connection between all sources
A dedicated Maximum Power Point (MPPT) solar regulator
The same battery algorithms as included in our AC mains ePOWER battery charger.
GEL, AGM, Flooded, Lithium and the ability to create a full custom profile
Vehicle input allows for either 12 or 24v and a maximum solar input of 45V/800W
40A output up to 40+°C with thermo controlled fan cooling
Fully programmable LCD display to show which source is charging the battery along with charger status, voltage and amperage
Temperature sensor included in charger for more accurate battery charging
EN3DC40+ Specifications
Output Voltage: 12V Nominal (8.0V min)
Output Current: (Maximum) 40A ~ 50A
Output Power:  775W
Selectable Battery Type: Gel, AGM, Flooded, Lithium, Program
Charger Voltage Range:  13.8V – 15.5V
Float Voltage Range:  13.0V – 13.8V
Charger Current:  (User Selectable) 5/10/15/20/25/30/35/40/45/50A (default 40A)
Equalise Voltage:  (Flooded Battery) 15.5V
Equalise Charging Current:  10% of Bulk Current Setting
Charging Control:  2 stage / 3 stage selectable (Default 3 stage)
DC Output Bank:  Single (non isolated)
Current draw from CH1 when not in use: 
Battery Temperature Setting:  Low/ Normal/ High (Battery Temperature Sensor Standard)
Efficiency:  95%
INPUT Rating:  (CH2 – MPPT Solar)
Input Voltage:  14.5 – 45VOC
Maximum Input: ≤ 23V input, 500W (600W allowable) ≥37.5V-45V input, 750W (800W allowable)
INPUT Rating:  (CH3 – Start/Alternator)
Input Voltage:  10.5 – 16VDC / 21 – 32VDC
Dimensions: 242mm (L) x 172mm (W) x 74mm (H)
Unit Weight 1.85 Kg
Enerdrive ePower 40amp 12v Battery Charger EN31240

The Enerdrive ePOWER 40A Battery Charger is a fully automatic, “set and forget” charger. It is designed to quickly and accurately recharge your batteries using algorithms that help maximise service life. Multistage smart charging technology enables the charger to be connected to your battery banks permanently. The ePower 40 amp, 12 volt smart battery charger with display and the ability to charge 3 separate battery banks.Suitable for caravans, camper trailer, motorhomes and boats.

Features
Multistage Charging: Fully automatic multistage 40A battery charger with the ability to charge 3 separate battery banks.
Separate Battery Banks: Isolated charging design where battery bank one is separate from battery bank two and three.
Programmable: Battery bank 1 can be programmed with a different charge algorithm over banks 2 and 3.
Current Control: User adjustable current output (e.g. Dial the 40amp unit back to run off a 1kVA generator).
Smart Charging: The ePOWER 40A battery charger will regulate its output based on the loads connected to your battery banks.
Wide AC Input Range: Operates on both 110V / 60Hz and 240V / 50Hz.
LED Display: Easy to use “set and select” menu along with scrolling charger status.
Silent Mode: Disables the cooling fan for total silent operation at night or whenever required. Activation reduces charge output by half and locks out fan for 12 hours.
Temperature Sensor: Battery temperature sensor included with 3 meter cable.
5 Year Warranty from an Australian company renowned for customer support.
Future Proof LIthium Battery Charging - Built In

Lithium batteries require a constant current / constant voltage charge algorithm. The Enerdrive ePOWER charger has a class leading Profile for charging all types of Lithium batteries to their full potential. This setting delivers the full rated output of the charger constantly with the charger switching to power supply mode once the voltage peak is met (indicating a full battery bank). Also feature fully customisable charge rate and end voltage settings;

Select Charger Voltage Constant: 13.9, 14.0, 14.1, 14.2, 14.3, 14.4, 14.5, 14.6 Volts
Select Charger Current: 5A, 10A, 20A, 40A - So you can charge different size batteries or battery banks

Specifications
Model: EN31240
Output Current: 40A
Charge: 14.2 - 15.5 V
Float: 13.4 - 13.8 V
Charging Control: Four Stages (Bulk/Absorption/Float/Maintenance)
Battery Compatibility: GEL, AGM, FLOODED, LITHIUM
Dimensions: 295mm (L) x 206mm (W) x 86mm (H)
Weight: 2.6kg
-
SKU:EPL-125-G2-DC40-AC40