Victron Quattro Inverter Charger 48/15000/200 - 100/100

DESCRIPTION

Description
Victron Quattro Inverter Charger 48/15000/200 - 100/100Similar to the MultiPlus, the Quattro is also a combined inverter and charger. Additionally it can accept two AC inputs and automatically connect to the active source. Its many features include a true sine wave inverter, adaptive charging, hybrid PowerAssist technology plus multiple system integration features such as three or split phase operation and parallel operation.

Specifications:

Output Current Rating (Amps) 200.0 AmpsWattage12000WPeak Power25000WOutput Voltage and Frequency230 Vac ± 2% / 50 Hz ± 0.1%Output Power12000W (continuous output power at 25­­°C) | 10000W (continuous output power at 40­­°C) | 7000W (continuous output power at 65­­°C)Input Voltage38-66VOperating Temperature Range-40 to +65°CAC Input187-265VAC | 45-65Hz | 1Inverter Output Continuous Watts12000W (continuous output power at 25­­°C)Charge voltage 'absorption'57.6VCharge Voltage Float - Wet (25 degrees)**55.2VCharge voltage 'storage'52.8VInverter Output Nominal Efficiency96% (maximum)No load power consumption80W | 30W in search modeProduct Dimensions (mm) LxWxH488 x 344 x 572Net Weight (kg)72.0 Kg

Features:

Two AC Outputs

The main output has no-break functionality. The Quattro takes over the supply to the connected loads in the event of a grid failure or when shore/generator power is disconnected. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption.The second output is live only when AC is available on one of the inputs of the Quattro. Loads that should not discharge the battery, like a water heater for example, can be connected to this output.

Virtually unlimited power thanks to parallel operation

Up to 6 Quattro units can operate in parallel. Six units 48/10000/140, for example, will provide 48kW / 60kVA output power and 840 Amps charging capacity.

Three phase capability

Three units can be configured for three phase output. But that’s not all: up to 6 sets of three units can be parallel connected to provide 144kW / 180kVA inverter power and more than 2500A charging capacity.

Power Control – Dealing with limited generator, shore side or grid power

The Quattro is a very powerful battery charger. It will therefore draw a lot of current from the generator or shore side supply (16A per 5kVA Quattro at 230VAC). A current limit can be set on each AC input. The Quattro will then take account of other AC loads and use whatever is spare for charging, thus preventing the generator or mains supply from being overloaded.

Power Assist – Boosting shore or generator power

This feature takes the principle of Power Control to a further dimension allowing the Quattro to supplement the capacity of the alternative source. Where peak power is so often required only for a limited period, the Quattro will make sure that insufficient mains or generator power is immediately compensated for by power from the battery. When the load reduces, the spare power is used to recharge the battery.

Solar energy: AC power available even during a grid failure

The Quattro can be used in off grid as well as grid connected PV and other alternative energy systems.
Loss of mains detection software is available.

System configuring

- In case of a stand-alone application, if settings have to be changed, this can be done in a matter of minutes with a DIP switch setting procedure.
- Parallel and three phase applications can be configured with VE.Bus Quick Configure and VE.Bus System Configurator software.
- Off grid, grid interactive and self-consumption applications, involving grid-tie inverters and/or MPPT Solar Chargers can be configured with Assistants (dedicated software for specific applications).

On-site Monitoring and control

Several options are available: Battery Monitor, Multi Control Panel, Ve.Net Blue Power panel, Colour Control panel, smartphone or tablet (Bluetooth Smart), laptop or computer (USB or RS232).

Remote Monitoring and control;

Victron Ethernet Remote, Venus GX and the Colour Control Panel.
Data can be stored and displayed on our VRM (Victron Remote Management) website, free of charge.

Remote configuring;

When connected to the Ethernet, systems with a Colour Control panel can be accessed and settings can be changed.

Specification
SKU QUA483150000

Brand Victron

GTIN 8719076037347

Product Category Power Inverter Chargers

Voltage 48V

Wattage: 12000W

Peak Power: 25000W

Input Voltage: 38-66V

Dimensions: 488 x 344 x 572 mm

Weight: 72 Kg

NOTE: see full product specifications & further product info in the section on this page.

Warranty
Warranty Period: 5 Years

Warranty Details:

Delivery
- We ship Australia-wide with national road express freight companies such as Star Track, TNT and Toll.
- Small Items are sent with Australia Post via regular post.
- Delivery times are generally 3-5 days from day of dispatch for major cities (sometimes quicker). Please allow longer for regional and remote areas.
- Once your item(s) have been dispatched, we will provide you freight tracking information so you can track your delivery to your door.
- Items are fully insured during the freight process.
- Unfortunately we cannot deliver to PO Boxes.
- For further details on our Delivery Process you can visit our .