Victron Skylla 24V 30A (1+1) Charger

DESCRIPTION

Description
Victron Skylla 24V 30A (1+1) ChargerOne full rated output and one 4 Amp output. Charge voltage can be precisely adjusted to suit any battery system. The input for the charger is 230V at 50/60HZ. Charge voltage can be measured directly on the battery terminals in order to compensate for voltage loss due to cable resistance. An external sensor allows measuring battery temperature and compensating charge voltage accordingly.

Perfect chargers for any type of battery Charge voltage can be precisely adjusted to suit any sealed or unsealed battery system. In particular, sealed maintenance free batteries must be charged correctly in order to ensure a long service life. Overvoltage will result in excessive gassing and venting of a sealed battery. The battery will dry out and fail.

Suitable for AC and DC supply (AC-DC and DC-DC operation) Except for the 3 phase input models, the chargers also accept a DC supply.

Controlled charging Every TG charger has a microprocessor, which accurately controls the charging in three steps. The charging process takes place in accordance with the IUoUo characteristic and charges more rapidly than other processes.

Use of TG chargers as a power supply As a result of the perfectly stabilized output voltage, a TG charger can be used as a power supply if batteries or large buffer capacitors are not available.

Two outputs to charge 2 battery banks (24V models only) The TG chargers feature 2 isolated outputs. The second output, limited to approximately 4 A and with a slightly lower output voltage, is intended to top up a starter battery.

To increase battery life: temperature compensation Every Skylla TG charger comes with a battery temperature sensor. When connected, charge voltage will automatically decrease with increasing battery temperature. This feature is especially recommended for sealed batteries which otherwise might be overcharged and dry out due to venting.

Battery voltage sense In order to compensate for voltage loss due to cable resistance, TG chargers are provided with a voltage sense facility so that the battery always receives the correct charge voltage.

Specifications:

- Input Voltage (V AC)230
- Input Voltage Range (V AC)185-264
- Input Voltage Range (V DC)180-400
- Frequency (Hz)45-65 Hz or DC
- Power Factor1
- Charge Voltage 'Absorption' (V DC)28.5
- Charge Voltage 'Float" (V DC)26.5
- Charge Current House Batt.30
- Charge Current Starter Batt.4
- Charge CharacteristicsIUoUo (three step)
- Battery Capacity (Ah)150-500
- Temperature SensorYes
- Can be used as a power supplyYes
- Remote AlarmPotential free contacts 60V / 1A (1x NO and 1x NC)
- Forced CoolingYes
- Protectiona, b, c, d
- Operating Temperature Range-40 to +50°C (-40 - 122°F) Full output current up to 40°C
- Humidity (Non-condensing)max 95%
- Material & Colouraluminium (blue RAL 5012)
- Battery-ConnectionM8 studs
- 230 VAC-Connectionscrew-clamp 2,5 mm² (AWG 6)
- Protecttion CategoryIP 21
- Weight kg5.5
- Dimensions365x250x147 mm
- SafetyEN 60335-1, EN 60335-2-29
- EmissionEN 55014-1, EN 61000-3-2
- ImmunityEN 55014-2, EN 61000-3-3

Specification
SKU SDTG2400301

Brand Victron

GTIN 8719076025719

Product Category Battery Chargers

Voltage 24V

Weight (kg) 5.5

Output Current Rating (Amps) 30

Dimensions 365 x 250 x 147 (LxWxH) mm

NOTE: see full product specifications & further product info in the section on this page.

Warranty
Warranty Period: 5 Years

Warranty Details:

Delivery
- We ship Australia-wide with national road express freight companies such as Star Track, TNT and Toll.
- Small Items are sent with Australia Post via regular post.
- Delivery times are generally 3-5 days from day of dispatch for major cities (sometimes quicker). Please allow longer for regional and remote areas.
- Once your item(s) have been dispatched, we will provide you freight tracking information so you can track your delivery to your door.
- Items are fully insured during the freight process.
- Unfortunately we cannot deliver to PO Boxes.
- For further details on our Delivery Process you can visit our .