Victron SmartSolar MPPT 150/85-MC4 VE.Can Charge Controller

DESCRIPTION

Description
Victron SmartSolar MPPT 150/85-MC4 VE.Can Charge Controller

Solar charge controller:

The MPPT VE.Can SmartSolar charger uses the latest and fastest technology to convert energy from a solar array into energy that optimally charges a battery banks.

The SmartSolar charge controller will even recharge a severely depleted battery. It can operate with a battery voltage as low as 0 Volts, provided the cells are not permanently sulphated or otherwise damaged.

MPPT: Ultra Fast Maximum Power Point Tracking:

The MPPT VE.Can SmartSolar charger connects to a PV array of 150 or 250 Volt Voc and will automatically detect and charge your 12, 24, or 48V battery bank with current ranging from 70 to 100A depending on the model.

The charge settings are fully programmable and can even be set up for different battery chemistries, like lead-acid, lithium and others.

Control Your Charger Remotely:

The MPPT VE.Can SmartSolar charger can be remotely controlled and configured over Bluetooth via the VictronConnect App. This allows device set-up, management, and at-a-glance information, such as battery voltage and current, PV voltage and current, and historical data.

Daisy Chain Additional Units:

The VE.Can SmartSolar charger is equipped with CAN bus ports. This allows for communication with additional VE.Can SmartSolar chargers. The additional units are simply “daisy chained” to each other with a single RJ45 cable between the individual units.

When connected to each other, all individual VE.Can SmartSolar chargers, will synchronise their charge stages. They can also send their data, via a single cable, to a GX monitoring device.

Remote Monitoring and Control:

If the GX device is connected to the internet, the Victron Remote Management Portal (VRM) provides access to the full power of your solar charger(s).

For remote installations - even when there is no internet connection nearby - you may be able to monitor your MPPT by connecting the GlobalLink 520.

SmartSolar Control Display:

The VE.Can SmartSolar charger is also equipped with a VE.Direct port like our other MPPT solar chargers. This port can be for single unit monitoring or for streetlight control. The remote on/off connector can be externally controlled by a third-party device like a lithium battery. An optional plug-in LCD display/control provides live-data, set-up and management, straight from the face of the device.

Please Note: The image shown is not the correct image for this model.Specifications:

Battery voltage12 / 24 / 48V Auto Select (software tool needed to select 36V)Rated charge current85ANominal PV power, 12V 1a,b1200WNominal PV power, 24V 1a,b)2400WNominal PV power, 36V 1a,b)3600WNominal PV power, 48V 1a,b)4900WMax. PV short circuit current 2)70A (max 30A per MC4 conn.)Maximum PV open circuit voltage150V absolute maximum coldest conditions

145V start-up and operating maximum

Maximum efficiency98%Self-consumptionLess than 35mA @ 12V / 20mA @ 48VCharge voltage 'absorption'Default setting: 14,4 / 28,8 / 43,2 / 57,6V (adjustable with: rotary switch, display, VE.Direct or Bluetooth)Charge voltage 'float'Default setting: 13,8 / 27,6 / 41,4 / 55,2V (adjustable: rotary switch, display, VE.Direct or Bluetooth)Charge voltage 'equalization'Default setting: 16,2V / 32,4V / 48,6V / 64,8V (adjustable)Charge algorithmmulti-stage adaptive (eight preprogrammed algorithms) or user defined algorithmTemperature compensation-16 mV / -32 mV / -64 mV / °CProtectionPV reverse polarity / Output short circuit / Over temperatureOperating temperature-30 to +60°C (full rated output up to 40°C)Humidity95%, non-condensingMaximum altitude5000m (full rated output up to 2000m)Environmental conditionIndoor, unconditionedPollution degreePD3Data communication portVE.Direct or BluetoothRemote on/offYes (2 pole connectorProgrammable relayDPST AC rating: 240VAC / 4A DC rating: 4A up to 35VDC, 1A up to 60VDCParallel operationYes (notsynchronized)ColourBlue (RAL 5012)PV terminals35 mm² / AWG2 (Tr models) Three pairs of MC4 connectors (MC4 models)Battery terminals35mm² / AWG2Protection categoryIP43 (electronic components), IP22 (connection area)Weight4.5kgDimensions (d x w x h)103 x 295 x 246

Specification
SKU SCC115085511

Brand Victron

GTIN 8719076050346

Product Category Solar Charge Controllers

Weight: 4.5 Kg

Amps: 85A

Voltage: 12 / 24 / 48V Auto Select (software tool needed to select 36V)

Dimensions: 103 x 295 x 246 (D x W x H)

Operating Temperature Range: –30°C to +60°C (full rated output up to 40°C)

Protection: PV reverse polarity / Output short circuit / Over temperature

Charge Voltage\: Default Setting: 14.4 / 28.8 / 43.2 / 57.6V (adjustable with: rotary switch, display, VE.Direct or Bluetooth)

Nominal PV Power: 12V - 1200W | 24V - 2400W

NOTE: see full product specifications & further product info in the section on this page.

Warranty
Warranty Period: 5 Years

Warranty Details:

Delivery
- We ship Australia-wide with national road express freight companies such as Star Track, TNT and Toll.
- Small Items are sent with Australia Post via regular post.
- Delivery times are generally 3-5 days from day of dispatch for major cities (sometimes quicker). Please allow longer for regional and remote areas.
- Once your item(s) have been dispatched, we will provide you freight tracking information so you can track your delivery to your door.
- Items are fully insured during the freight process.
- Unfortunately we cannot deliver to PO Boxes.
- For further details on our Delivery Process you can visit our .