Water Tank Hose Nozzle Angle 90 Degrees 40 Mm With G 1 1/2 Inch Internal Thread

DESCRIPTION

Description

Suitable Inlet Connector for 35 Litre In-built Water Tank

Designation: hose nozzle angle 90 degrees 40 mm with G 1 1/2 inch internal thread (overflow elbow)
Material: plastic, plastic, PP, rubber
Contents: 1 piece PP hose nozzle angle 90 degrees 40 mm, 1 piece PP union nut with G 1 1/2 inch internal thread, 1 piece flat rubber seal
Hose tail: 40mm (1 1/2″) outside diameter (to connect hose with 40mm inside diameter)
Internal thread: G 1 1/2 inch (approx. 44.9 mm inner diameter or core hole diameter)
Design: hose nozzle with 90° angle (also known as overflow elbow)
Properties: stable 90-degree angled hose nozzle with 40 mm (overflow bend), internal thread G 1 1/2 inch, weather-resistant, flat sealing, easy assembly without having to glue, the seal can be used to compensate for temperature fluctuations from summer to winter, with a stable union nut made of PP plastic
Area of ​​application: Industry, crafts, mechanical engineering, vintage cars, house, hobby, garden, rain barrels, water tanks, rain barrels, steel tanks, containers, ponds
Installation: the flat seal of this 90 degree 40 mm angle hose nozzle (overflow elbow) with G 1 1/2 inch internal thread should always rest on the inside of the union nut
Tip: always tighten the hose nozzle by hand, you can also tighten it slightly with water pump pliers (but not so tightly that the flat seal is not squeezed too much)
-
Additional information
Weight 0.5 kg
Dimensions 30 x 20 x 15 cm