24SN25KA 25K (A) LOGARITHMIC POT POTENTIOMETER

DESCRIPTION

25K OHM LOGARITHMIC (A) SINGLE GANG 24MM POTENTIOMETER
With imperial standard shaft & bushings made to ourrigid engineering specifications. The potentiometers are full size - 24mm diameter types . Power rating is 0.5W max. They have genuine 6.35mm (1/4) shafts with a flat machined 25% of the diameter for grubscrews or interference fit knob mounting. The shaft is a generous 38mm long. The bush is a 3/8 32 T.H.D. type which we believe is necessary for good fixing to a panel. Another important feature of the pots is their PCB mount capability. The pins are rigidly mounted on phenolic with the centre pin offset from the two outer terminals. When soldered into a PCB, the pot is quite rigidly held on its own. Double gangpots are held in 6 places and require no extra mechanical mounting assistance. The pins are large enough to terminate screened cable, etc.,if the job requires hard wiring. An engineering drawing appears below. You may safely use it to design PCB artwork etc., as we have standardised this design.Value25K
 
SPECIFICATIONS
AC Voltage rating : 150.0V
Continuous Power : 0.25W
Resistance level : 25.0k?
Potentiometer Diameter : 24mm
Log or Linear? : Logarithmic
Potentiometer Knob Type : Imperial D
Potentiometer Terminal Type : PCB mount
Potentiometer Shaft Length : 38.5mm
potentiometer nut size : 24mm(3/8inch 32THD)
Pack Quantity : 1.0pc
Passive mount type : Panel, Through Hole
Passive connector type : Solder Legs
Component package : Metal can
Passive number of legs : 3.0
Passive marking code : Number code

 

Barcode Number: 9319236005132