AMC XIA 30 Integrated Stereo Amplifier

DESCRIPTION

XIA 30 Integrated Stereo Amplifier

Punching well above its weight, both in terms of output and price point; the AMC XIA30 is where good amplifiers start.  It's high current design is mega impressive.

Phono Stage 

The XIA30 features a unique phono stage design, utilising two top-grade op-amps per channel for unparalleled THD, TIM and noise reduction, providing switchable Moving Magnet or Moving Coil cartridge options.
 
Tone Controls 
The XIA30 incorporates a specially designed passive tone control circuit to give natural sound quality. The tone control stage can be completely by-passed with the Direct switch to give natural sound quality.

High Quality Components 
The XIA30 is equipped with audiophile-grade components for physiological precision and powerful low-volume sound reproduction. Tone control and phono responses are precise and dynamic.

High Current 
The XIA30's 30 Amp high peak output devices and optimised power supply design provide the current delivery needed to deliver dynamic audio to passive speakers. Its specially designed output stage with perfect virtual image topology further ensures direct, high-quality connection to loudspeakers without reliance on relays so its able to drive modern music with dynamic accuracy.

Toroidal Transformer  
No amp is complete without a competent power supply section and a robust toroidal transformer able to provide the continuous power needs of the amplifier circuit. The universal power transformer in the XIA30 has an international safety compliance and exhibits exceptionally low RF noise to help give the XIA30 the ultimate in crystal clear sound.

Gold Connectors
Gold plated RCA connectors & binding post speaker terminals provide reliable sound transmission to and from the AMC XIA 30 Integrated Stereo Amplifier.

About AMC

AMC is actually responsible for some of the very best brands on the market today. In fact, AMC’s failure rate is so low that most companies would only dream of.

AMC is a state of the art design and engineering company as well as manufacturer of high end Hi-Fi components. Combined with their design philosophy focusing on  25 years of reliability and state of the art manufacturing facility - as far as value for money is concerned, you get bang for buck and then some.

Peter Bath and Malcolm Blockley, both previously part of NAD, Acoustic Research and Proton, have used the cost-effectiveness of AMC's "common-platform" product design and production processes to create a product range that fulfils all of an audiophile's expectations at an attractive price point.

Features & Specifications
Remote Controlled All Analogue Stereo Integrated Amplifier
Rated Power into 8/4 Ohm (Both Channels Driven): 30 Watts
Rated T.H.D. (Total Harmonic Distortion) 20Hz-20kHz: 0.05%
Input Sensitivity for 1W/Rated Power into 8 Ohms
High Level Inputs: 23mV/150mV
Phono Input MM: 0.5mV/2.7mV
Phono Input MC: 0.05mV/0.27mV
Input Impedance
High Level Inputs: 20K ohms
Phono Input MM/MC: 47K ohms/100pF
Frequency Response
Tone Bypass: 20-20kHz: +/-0.5dB
Normal: 20-20kHz: +/-1.0dB
High Level Inputs -3dB: 10Hz/60kHz
Signal To Noise Ratio (1W/8 Ohms)
High Level Inputs A WTD: 88dB
Phono Input A WTD: 80dB
Separation 20-20KHz >65dB
Tone Control Range
Bass at 100Hz: +/-10dB
Treble at 10kHz: -8/+11dB
Overall Feedback: 26/29dB
Three Line Level Inputs
Switchable Moving Magnet/Moving Coil Phono Input
¼” (6.35mm) Headphone Output
Speaker Binding Posts which can accept Banana Plugs, Spades or Bare Wire
Tone Controls with Direct Switch to bypass them
Tape Monitor Circuit
Pre Out/Power In
Balance Control
Front Panel Mute
Comprehensive Remote Control
Removable Power Cable: Upgrade to an IsoTek Power Cable for better performance
Available Finishes: Black or Silver
Dimensions (WxHxD): 430 x 82 x 288mm
Weight : 6.8kg
Manufacturer’s Warranty: 3 Years