Pro-Ject DS3 B Phono Preamplifier

DESCRIPTION

A BROAD ARRAY OF CARTRIDGES AWAIT

 


The Phono Box DS3 matches superbly to a wide range of cartridges thanks to precise load impedence adjustment on the front panel for moving coil cartridges. Because the impedance can be adjusted so easily and in real time as a record is playing, getting the exact setting for your taste is simple.

 


 




HIGH END DESIGN

 


The Phono Box DS3 B incorporates a fully balanced gain stage design. Whether you're using a single-ended RCA or balanced connection, the fully symmetrical gain stage can optimise signal-to-noise ratios, feeding the fully passive and discrete RIAA equalization stage with the cleanest signal to work its magic on. Entirely split passive equalization allows for better impedance matching and lower deviation from the ideal RIAA curve. 

Elsewhere, the Phono Box DS3 B uses fully discrete audio circuitry. A discrete circuit is composed of disparate, individual electronic components, also called discrete components. Years of experience have proven that even the best Op-Amps do not come close to the neutral, natural, dynamic, and vivid presentations of discrete circuitry.

 




TRUE BALANCED CONNECTION

 


The Phono Box DS3 B offers the option of running a fully balanced signal. And the best part is that thanks to a range of new cables from Pro-Ject, these inputs can be used with any Pro-Ject turntable, whether it has RCA or 5P XLR outputs. 

However, to truly utilise the balanced circuitry, a Pro-Ject turntable with a moving coil cartridge and 5P output can be connected to the Phono Box DS3 B with a 5P to XLR cable. The decreased noise and interference and improved dynamics have to be heard to be believed.

 


PHONO BOX DS3 B SPECS




Full Technical Specifications
Input impedanceStepless 10 1000 ohms or fix 47kOhms
Gain (+ 6dB using XLR Out sockets)40, 45, 50, 55, 60, 65 dB
Signal / Noise ratio MC (60dB)85dBV, 91dBV - A weighted
THD (20Hz-20kHz)
Subsonic filterat 20Hz with 18dB/octave
Line-level output1x pair RCA, 1x pair XLR
Trigger In/Out12V on/off detector
Power consumption18V/max.290mA DC,
Weight1480g without power supply
Input capacitance50, 150, 300, 400 pF
Signal / Noise ratio MM (40dB)104dBV, 111dBV - A weighted
THD at 1 kHz
RIAA-equalisation curve accuracy
Input1x 5-pin mini XLR / 1x pair XLR / 1x pair RCA phono
Wiring XLR sockets1 ground, 2 hot and 3 cold
Power supply DC18V/500mA
Dimensions206 x 72 x 194 (205 with sockets) mm
CUSTOMER REVIEW.Variant: Black