HOME VINYL RELATED CARTRIDGES AUDIO TECHNICA AT33SA CARTRIDGE
DESCRIPTION
Introducing the AT33Sa from Audio Technica
Dual Moving Coil Cartridge
The AT33Sa is the first Audio-Technica MC cartridge model to feature a Shibata stylus. In addition to its superior high-range performance as a line-contact stylus, the Shibata stylus produces mid and bass sound that is strong and rich.
The Shibata stylus is mounted on a boron cantilever with a double damper to greatly improve sound quality.
Advanced tapered boron cantilever and reduced weight
Tapering the cantilever and revising the number of coil rotations reduce the weight, giving the cartridge better high range performance and wide range reproduction.
Neodymium magnet with dramatically enhanced magnetic energy and permendur yoke
The model uses a neodymium magnet with maximum energy product BHmax of 50 and a permendur yoke with high saturation flux density and outstanding magnetic properties, which further enhances the concentrated magnetic field of the coil gap.
PCOCC coilÂ
This enables purer transmission because it is not subject to grain boundaries in the direction of transmission.
High-separation, wide response dual moving coil
The basic structure is an original MC type, with separate cylindrical coils to the left and right channels. Since power is generated independently in each of the left and right channels, this structure offers truly superior separation.
If the signal from the opposite channel escapes, this can cause intermodulation distortion and have a decisive impact on audio quality and how the stereo sound spreads. The structure of this product ensures a clear and smooth sound.
Additionally, the two coils have a reverse-V shape which reduces effective moving mass as seen from the stylus tip, limiting unnecessary movement of the coil and further eliminating distortion.
VC mould limits unnecessary vibration
The VC mould that affixes the coils is made with hard synthetic resin containing potassium titanate to make it highly strong and rigid.
A tough body designed to be rigid
The productâs housing is made of precision-cast hard aluminium alloy. Hard synthetic resin sandwiching in the structure on the top and bottom suppresses parasitic resonance which minimises unnecessary noise while enhancing rigidity and the signal-to-ratio.
Technical Specifications
Type Dual Moving Coil
Body Material Aluminium/Synthetic Resin
Frequency Response 15 to 50,000 Hz
Channel Separation 30 dB (1 kHz)
Output Chanel Balance 0.5 dB (1 kHz)
Output 0.4 mV (at 1 kHz, 5 cm/sec)
Vertical Tracking Angle 23 degrees
Vertical Tracking Force Range 1.8 to 2.2 g (standard 2.0 g)
Stylus Shape Shibata
Stylus pressure 1.8 to 2.2g (standard 2.0g)
Stylus Curvature Radius
Shibata
Stylus Construction Nude square shank
Cantilever Nude tapered boron
Static Compliance 40 x 10 â 6 cm / dyne
Dynamic Compliance 10 x 10 â 6 cm / dyne (100 Hz)
Wire Used for Coil PCOCCÂ
Terminal Pins PCOCCÂ
Recommended Load Impedance Min 100 OÂ
Coil Impedance 10 O (1 kHz)
DC Resistance 10 O
Coil Inductance 22 H (1 kHz)
Cartridge Weight 6.9 g
Dimensions 16.0 (H) x 16.6 (W) x 26.5 (L) mm
Mounting 1/2â centres
Included Accessories Included 1 non magnetic screw driver 1 brush; 2 washers 2 Nuts 2 x 19 mm mounting screws 1 plastic protector 1 set of PCOCC Lead Wires (AT6101)
You can check your conversation between the seller and you in
My Messages. Keep yourself safe. Always meet in person and never send or wire money.
Click here to learn more.