DA11ABL-WP-EU BLUETOOTH & ANALOG AUDIO DANTE WALL PLATEEU-UK FITMENT

DESCRIPTION

BLUSTREAM DA11ABL-WP-EU BLUETOOTH & ANALOGUE AUDIO DANTE® WALL PLATE EU

The DA11ABL-WP is a multi-input / output wall plate to convert Bluetooth and analogue audio within a digital Dante® networked audio system.

The DA11ABL-WP converts 2 x input channels of Bluetooth, or unbalanced audio to Dante® digital audio, and 2 x channels of Dante® audio to 2 x output channels of unbalanced audio.

Software configuration for the DA11ABL-WP allows for the Bluetooth name to be amended as required where being deployed in multi-user spaces.

The DA11ABL-WP is a plug & play device that is powered using PoE (Power over Ethernet), or via 12V power supply, offers support for AES67 RTP audio transport, and magnetic faceplate design allows for Decora backbox compatibility.

The DA11ABL-WP is the ideal BYOD interface to allow any Bluetooth device to stream audio wirelessly to a Dante® audio system.

KEY FEATURES

Dante® network wall plate interface for Bluetooth and analogue L/R audio inputs, and L/R audio outputs

Converts 2ch Bluetooth, or un-balanced audio sources to Dante® audio

Converts 2x Dante® audio channels to un-balanced audio outputs

Configurable Bluetooth naming allows for simple discovery of the unit

Adjustable input sensitivity from 24dBu to -28dBV via control software

Adjustable output gain from 20dBu to -28 dBV via control software

Supports: 44.1, 48 & 96kHz sample rates @ 16, 24 or 32 Bit

Configurable Dante® device latency (supports 1, 2 or 5ms configurable using Dante® Controller)

Supports AES67 RTP audio transport

Features Class 0 IEEE 802.3af PoE for powering of product from any PoE switch

Supports power via 12V DC adapter (supplied) for when network switch does not support PoE

Magnetic faceplate surround allowing for both UK & EU backbox compatibility

*Dante® is a registered trademark of Audinate Pty Ltd

SPECIFICATIONS

Audio Input Connectors: 1 x Analogue Left / Right audio (3.5mm stereo jack)

Audio Output Connectors: 2 x Analogue RCA (Left / Right)

Network Connectors: 1 x PoE Dante® Ethernet Connection (RJ45)

Bluetooth: Bluetooth V5.0 - SBC / MP3 / AAC / APT-X / APTX-LL / APTX-HD, 44.1K-48KHz 16 / 24Bit

Configuration Switches: 1 x Push button (connect / selection)

Firmware Upgrade: 1 x Micro-USB UART port

Module Dimensions (W x H x D): 74mm x 74mm x 50mm (without faceplate)

Faceplate Dimensions (W x H x D): 85mm x 85mm x 5mm

Cut Out Dimensions (W x H x D): 52mm x 55mm x 38mm

Mounting Hole Spacing: UK 60mm CTC, EU 60mm CTC

Backbox Requirements: UK single gang backbox / EU single gang backbox

Shipping Weight: 0.3kg

Operating Temperature: 32°F to 104°F (0°C to 40°C)

Storage Temperature: - 4°F to 140°F (- 20°C to 60°C)

Power Supply: Class 0 IEEE 802.3af PoE or 12v/1A DC 2-Pin Phoenix connector

 
BOX CONTENTS

1 x DA11ABL-WP
1 x Magnetic Faceplate
1 x Quick Reference Guide

Weight: 0.2760 kg
Barcode Number: 9340242004420