LC6738W 1M WHITE CAT6 PATCH LEAD PRO2

DESCRIPTION

FEATURES

Category 6 cable, commonly referred to as Cat-6, is a cable standard for Gigabit Ethernet and other network protocols that are backward compatible with the Category 5/5e and Category 3 cable standards. Compared with Cat-5 and Cat-5e, Cat-6 features more stringent specifications for crosstalk and system noise. The cable standard provides performance of up to 250 MHz and is suitable for 10BASE-T, 100BASE-TX (Fast Ethernet), 1000BASE-T / 1000BASE-TX (Gigabit Ethernet) and 10GBASE-T (10-Gigabit Ethernet).

To maintain transmission characteristics and network integrity, it's essential to use the correct type of patch-cord to match the installation. A network port will perform only at the level of the LOWEST-rated component in the chain.

FEATURES
UTP CAT6 Patch Lead - Each cord has eight multi-strand conductors in 4 twisted-pair T568A color coded configuration.
Quality cable material - Fitted with 50µ Category-6 compliant 2-row (staggered pins) plug and fully-molded strain-relief boot.
Molded strain relief & Low profile flush moulded boots - With molded strain relief RJ45 male-to-male connectors this cable will be strong, and robust.
Packaged in heat-sealed hang-sell bags.
Complies with the applicable electrical transmission characteristics and flame tests specified in:
AS/ACIFS008:2006
ISO/IEC 11801 Category 6
TIA/EIA-568-B.2-1 Category 6

SPECIFICATIONS
Conductor
Material
Bare Copper
Size
24AWG
Construction
7/0.195±0.015mm
Insulation
Material
HD-PE
Thickness
Minimum at any point:
0.18mm
Maximum average:
0.20mm
Diameter:
0.96±0.03mm
Jacket
Material
PVC
Thickness
Minimum at any point:
0.50mm
Maximum average:
0.58mm
Diameter:
5.8±0.03mm
AVAILABLE MODELS
Length
Avail. Colours (Patch)
Avail. Colours (Crossover)
0.5m
 
1m
2m
 
3m
 
5m
10m
15m
 
20m
 
30m
 
40m
 
ABOUT PRO.2 CAT6 LEADS
Pro2 CAT6 cables pass the Fluke Linkware Cable Test Management performance tests
Meanwhile, equivalent CAT6 cables from leading competitors in the market do not pass the same performance test. View the relevant PDF files down below:
View the Pro2 Cat6 cable test result (239kb)
View the test results of two leading competitors (424kb)
View our declaration of conformity
View our AS/ACIFS008:2006 Compliance Report
Category 6 Cable Standard:
Category 6 is a standard that aims to support transmission at frequencies up to 250 MHz over 100Ω twisted pair.
Supports current Category 6 applications such as 100BaseTX,100BaseVG, ATM, Gigabit Ethernet and all fast Ethernet protocols.
How to distinguish a Cat 6 plug from a Cat-5 or Cat-5E plug:
To distinguish a Cat-6 plug from a Cat-5 or a Cat-5E plug, just simply look at the way the cable's wires have been terminated at the end of the plug:
A Cat-5 or a Cat-5E plug will ALWAYS have all eight wires in a single row
The majority of Cat-6 plugs will have wires in two rows with four wires per row
Some Cat-6 plugs will have wires in two rows with 6 wires in the top row and 2 wires in the bottom row
initPro2Cat6Patch();
VIDEO
Pro.2 CAT6 Leads Explained
Video not loading? Watch it over at YouTube!
Weight: 0.0450 kg
Barcode Number: 9328202010346