3D Printer Resin Dental LCD Series mm 500 gram Model Resin

DESCRIPTION

Formfutura Dental LCD Model Resin is a high-precision photopolymer resin designed for accurate modelling of dental models, aligner models, gums, teeth, crown and bridge models with removable dies. Dental LCD Model is specifically engineered to work with all open source LCD and DLP 3D printers in the range of 385 - 420nm. Dental LCD Model resin has a surface finish and color similar to gypsum, which perfectly accentuates depth and detail in the dental model. Formfutura Dental LCD Model resin is meant for modelling purposes only and not for intraoral use.
 
 Key features

High-resolution 3D printing with fine detail

Almost Odorless processing

Excellent dimensional accuracy and low shrinkage

Gypsum-like texture and color

Temperature resistant for dental aligner production

Compatible with all open source LCD and DLP 3D printers in the range of 385 - 420nm

 Applications

Models of dentures

Implant models

Crown and bridge models

Models of gums

Orthodontic models

 Resin properties (uncured liquid)

Viscosity: 700 cps at 25°C

Density: 1.18 g/cm2

 

Mechanical properties

Test method on post cured objects through 30 minutes high power LED curing.

Properties



Typical Value



Test Method




Glass transition temperature (Tg)



61°C



ASTM D7028




Water absorption



0.4%



ASTM D570-98




Impact strength (IZOD notched)



17 J/m



ASTM D256A




Tensile strength



46 MPa



ASTM D638M




Tensile Modulus



1100 MPa



ASTM D638M




Elongation at break



8%



ASTM D638M 




Flexural Strength



68 MPa



ASTM D790M 




Flexural Modulus



1900 MPa



ASTM D2240




Shore D Hardness



83



ASTM D2240


Please note that the above-displayed values can vary with individual machine processing, post-curing parts,  geometry, print orientation, print settings, and temperature.

Preparation(s) before starting to print

Shake the bottle for at least 2 minutes before each use.

After shaking the bottle, leave the resin to rest for 10 minutes to let air bubbles get out of the resin

The resin can be poured back from the vat into the bottle once your print is finished

Always use protective measurements like safety glasses and nitrile gloves when handling resins.

General printing guidelines

Burn-in layers: 2x  170 sec

Base layer curing times at 50 microns:  ±14 - 17 sec

Post-processing

We do advise you to post-process your 3D print in order to achieve the material properties
Rinse your 3D printed object in IPA or (Bio)Ethanol for approximately 5 minutes
An ultrasonic cleaner is preferred/recommended
Make sure that IPA and/or (Bio)Ethanol rinsed objects are perfectly dry before further post-curing
Place the rinsed parts in a well-ventilated area for at least 30 minutes, or use pressurized air for at least 2 minutes
Cure your object in a high power curing chamber for approximately 20-30 minutes at 65° C
The preferred curing wavelength is between 300-410nm 

 

Safety

Please always be aware that when 3D printing with resins that you are working with chemicals and that you should always be cautious and use the personal protective equipment as stipulated in our safety data sheets.

Always wear Respiratory Protection when sanding/cutting the resin object.

Always use nitrile gloves when handling resins and uncured resin objects.

Product export information

HS Code: 2916140090 Description: Resin for 3D Printing Country of origin: the Netherlands

 

Â

UPC: 0.75 KGS
Weight: 0.75 KGS

Brand:


Visit our website to view thousands more products like this and order online at: