3D Printing Resin Platinum LCD Series - Solid - Resin Pack

DESCRIPTION

Formfutura Platinum LCD Series is a general-purpose photopolymer LCD resin that is specifically developed to work with all open source LCD and DLP 3D printers in the range of 385 - 420nm. Our Platinum LCD resin is almost odorless and 3D prints with extremely high accuracy and a very smooth surface finish. The Platinum LCD Resin series is developed to 3D print with relatively short curing times.

Key features

Almost no odour  - Compared to other resins on the market our Platinum LCD resin is relatively odour-free!
UV weather resistant
Fast printing with short curing times
High-resolution 3D printing with fine detail

Vivid colors with an extremely high level of colorfastness

Truly opaque and translucent colors available
No discoloration and/or yellowing
Excellent dimensional accuracy and low shrinkage
Low water absorption
Compatible with all open source LCD and DLP in the range of 385 - 420nm

The Platinum LCD Series - Solid - Resin Pack contains the Solid Black, Solid White, Solid Light Grey resins ( 500g each)

Applications

Figurines and models
Functional prototyping
End-use products

Resin properties (uncured liquid)

Viscosity: 500 cps at 25°C
Density: 1.18 g/cm2

Mechanical properties

Test method on post cured objects through 10 minutes high power mercury curing.

Properties
Typical  Value
Test Method



Glass transition temperature (Tg)



51°C



ASTM D7028




Water absorption



0.4%



ASTM D570-98




Impact strength (IZOD notched)



18 J/m



ASTM D256A




Tensile strength



45 MPa



ASTM D638M




Tensile Modulus



1000 MPa



ASTM D638M




Elongation at break



8%



ASTM D638M




Flexural Strength



66 MPa



ASTM D790M




Flexural Modulus



1800 MPa



ASTM D2240




Shore D Hardness



82



ASTM D2240

 Please note that the above-displayed values can vary with individual machine processing, post-curing parts,  geometry, print orientation, print settings, and temperature.

Preparation(s) before starting to print

Shake the bottle for at least 2 minutes before each use.

After shaking the bottle, leave the resin to rest for 10 minutes to let air bubbles get out of the resin

The resin can be poured back from the vat into the bottle once your print is finished
Always use protective measurements like safety glasses and nitrile gloves when handling resins.

General printing guidelines

Base Curing Times at 50 micron

Translucent Black: 12sec
Translucent Aquamarine: 10sec
Translucent Blue: 12sec
Translucent Red: 11sec
Solid White: 12sec
Solid Black: 14sec
Solid Light Grey: 13sec

 Post-processing

We do advise you to post-process your 3D print in order to achieve the material properties

Rinse your 3D printed object in IPA or (Bio)Ethanol for approximately 5 minutes

An ultrasonic cleaner is preferred/recommended

Make sure that IPA and/or (Bio)Ethanol rinsed objects are perfectly dry before further post-curing

Place the rinsed parts in a well-ventilated area for at least 30 minutes, or use pressurized air for at least 2 minutes

Cure your object in a high power curing chamber for approximately 20-30 minutes at 65° C
The preferred curing wavelength is between 300-410nm

Safety

Please always be aware that when 3D printing with resins that you are working with chemicals and that you should always be cautious and use the personal protective equipment as stipulated in our safety data sheets.

Always wear Respiratory Protection when sanding/cutting the resin object.
Always use nitrile gloves when handling resins and uncured resin objects.

Product export information

HS Code: 2916140090 Description: Resin for 3D Printing Country of origin: the Netherlands

UPC: 2.00 KGS
Weight: 2.00 KGS

Brand:


Visit our website to view thousands more products like this and order online at: