MARINE PAINT 1 PAC POLYEURATHANE 4LT AUSTRALIAN MADE OPEN 6 DAYS

DESCRIPTION

MARINE 1 PAC POLYEURATHANE 4LT AUSTRALIAN MADE Crystal Marine Paint is a quick drying polyurethane that can be brushed rolled or sprayed onto exterior and interior surfaces . May be painted onto most solid surfaces, remove all loose particles, dust and oils and sand off to a solid surface. As most boats have already been painted previously, we strongly recommend that you try a test patch first to check that your preparation is correct for the surface. If you donêt know what has been applied before and it is best to check first. Timber - Bare timber should be sealed with the appropriate primer. Fibreglass - Should be sanded back to a solid surface and can be painted without a primer again, please try a small test patch first. Steel - Bare should be primed with Crystal Marine Red & Grey Phosphate Primer. Aluminium - May be painted after sanding. Use an etch primer on bare aluminium. « Coverage is approximately 9 -12 square metres per litre depending on the application. « Marine paint can be easily sanded and we recommend a fine sanding between coats. « For thinning and cleaning up use only mineral turps. « Recoat time 2 - 4 hours depending on weather conditions. « Spraying - only use clean mineral turps for thinning down and only use enough to get the marine paint to go through the spray gun. « Do not paint if temperature is less than 12çc