CONDTROL XLINER 360 G CROSS LINER LASER

DESCRIPTION

Condtrol Xliner 360G is a new generation laser level, allowing to project horizontal plane with a 360° fan angle. The ability to project vertical, horizontal, crossline and inclined planes helps to solve a wide range of tasks: installation of partitions, wallpapering, tile laying, etc. Brightness of the green laser is 4 times higher than red one, which increases the efficiency of the laser level in bright sunlight.

Green laser

XLiner 360G is equipped with a 520 nm green laser, which is 4 times brighter than red one at the same power of emitter. This feature makes the laser level equally effective at both indoor and outdoor constructions sites.

Pulse mode

For outdoor operation XLiner 360G has a pulse mode, which allows to work at distance up to 100 m using the laser receiver by CONDTROL.

High Protection rate

Shock-resistant rubberized case, high protection against moisture, dust and dirt make it possible to use XLiner 360G both indoors and at outdoor building sites at any time of the year.

Two types of thread

Thanks to two types of thread (1/4’’ and 5/8’’), the XLiner 360G can be installed on all types of tripods, as well as on accessories designed for fixing laser levels.

Tilt mode

When the tilt mode is activated, self-leveling is not available, which allows to project the line at any angle specified by the user. This feature is indispensable when marking and installing staircases, corner elements of construction or decor. If you direct the emitter of the laser level down, you can project the supporting axis for laying of floor coverings, including tiles.