Used Excavator Hydraulic Coupler Quick Hitch to suit 21-48 Ton machines, but is designed to allow a 90mm Pin machine to pickup attachments with 90-100mm Pins and a wider Pin Center distance.
Made for Machines: Daewoo DX300 LC / Daewoo Solar 290LC-V / 300LC-V / 300LC-V SLR, Doosan DX300 / DX300LC-3 / S300LC-V / S470LC-V, Hyundai R250LC-7 / R290LC-7, Kobelco SK220 / SK250LC / SK290LC / SK300 / SK310 / SK320 / SK330, Komatsu PC300 / PC300 Mighty / PC300-3 / PC300-5 / PC300-6 / PC300-7 / PC300LC-7 / PC340 / PC350 / PC360, Samsung SE280LC, Volvo EC240B / EC240C etc. but will fit other machines (see below list of machines we have found so far).
Suits Attachments from Machines: Caterpillar 330C w/Mass Linkage / 345B w/Reach Linkage / 345C w/TB Link, Hitachi EX300 / EX300 / EX310 / EX330 / EX350 / EX355, Hitachi Zaxis 300 / 330 & LC / 350 / 350LC / 350LC-3 / 370, John Deere 350D LC / 370C etc. but will fit other machines attachments (see below list of machines attachments we have found so far).
Condition is used with a few small bangs and scrapes, but otherwise is a solid, well built Hitch and has plenty of life left.
Pin Setup (where your machine's Dipper Arm goes in): * Front & Rear Pin Diameter: 90mm. * Between The Ears (BTE): 382mm Between the inside Ear Bosses (which can be shaved back up to 439mm between the Ear Plates if you need more inside width for your excavator's dipper arm to fit in). * Pin Center to Pin Center: 518mm.
Pin Setup (where the Hitch sits into your bucket's Headstock): * Front Pin Diameter: 90mm (could be bored out to 100mm). * Rear Pin Diameter: 90-100mm. * Between The Ears (BTE): 400mm width where the hitch sits in your bucket. * Pin Center to Pin Center: is larger than where the Dipper Arm goes in, somewhere between 570-620mm?
You can check your conversation between the seller and you in
My Messages. Keep yourself safe. Always meet in person and never send or wire money.
Click here to learn more.