29mm pin, 450mm Excavator & Backhoe GP Digging & Trenching Bucket

DESCRIPTION

Used 450mm Backhoe & Excavator GP Digging & Trenching Bucket. Condition is used and there is some surface rust, but is otherwise a good solid bucket, and has plenty of life left. Current Headstock configuration: 29mm Pin Diameter but the pin holes have bushes in them, if they were punched out it would leave 35mm holes ready for 35mm pins. 202mm Pin Center to Pin Center (CtoC). 81mm Between the Ear Plates (BTE), 75mm Between the flanges of the rear pin hole bosses (but these bosses could be removed or shaved back to the 81mm Between the Ear Plates if you need more inside width for your hitch or dipper arm to fit in). The front left side pin hole (looking at the bucket as in pics# 2-4) has no bush in it so it is a 35mm diameter hole. Shipping dimensions: 475mm Wide, 680mm Deep, 425mm High. Weight: 58kg. Call if you would like to discuss or to come inspect it. We are at . You can pick up, we can deliver to a reasonable distance for an agreed fee, or we can arrange freight within Australia. (MIC#_1402AG231107015)