BM25 Portable Beveller Max Bevel Width 25mm 240V Motor ITM WA-BM25

DESCRIPTION

BM25 PORTABLE BEVELLER MAX BEVEL WIDTH 25MM 240V MOTOR ITM WA-BM25

FEATURES

The BM25 is an easy to use, portable heavy-duty machine designed for bevelling steel plates prior to welding. The beveller is equipped with powerful motor and fitted with face milling bevelling head, allowing smooth operation and exceptional efficiency.
BM25 enables milling straight edges up to 25mm bevel width, whereas variable spindle speed facilitates optimizing cutting conditions. Continuously adjustable milling depth and bevel angle between 0° and 90° require no tooling to change. BM25 has got a state-of-the-art electronic motor overload module protecting the operator, the machine and the tooling.
The beveller is equipped with guide rollers, which make it easy and light to operate.
Comfort and ergonomics of work
Continuously adjustable bevel angle between 0 and 90 degrees
Single head operates with face milling method
Maximum 25mm bevel width (more than one pass could be required)
Continuous bevel width adjustment
Powerful electric motor
Milling head is equipped with 5 pcs of 2-sided indexable cutting inserts
Electronic speed control between 1800-5850 rpm
Overload protection


SPECIFICATIONS

Voltage: 1~ 220 - 240 V, 50 - 60 Hz
Power: 2200W
Spindle Speed (Without Load): 1800 - 5850rpm
Maximum Bevel Width (b, Fig. 1): 25mm (1")
Maximum Depth Of Cut (d, Fig. 1): 12.5mm (1/2")
Bevel Angle (B, Fig. 1): 0° - 90°, 15° - 75° (Recommended)
Minimum Workpiece Thickness: 2mm
Weight: 12.5kg

Comfort And Ergonomics Of Work:

Each user can individually adjust the position of the grip and handle
Grip can be rotated through 360 degrees
Adjustable grip and handle enable comfort of work for both right and left-handers and operators of different heights
The handle can be tilted to the desired angle
Guide set with rollers can be rotated through 360 degrees
2 possible positions of rollers (wide and narrow)

Continuously Adjustable Bevel Angle Between 0° And 90°:

One milling head for full range of angles
No need for separate milling heads for specific angles
Recommended bevel angle from 15 to 75 degrees

Bevel Width Up To 25mm At 45°:

Various bevel widths are possible by means of the WA-BM25
The final results depend on combination of bevel angle and bevel depth

 

Work At 0°:

Facing process to produce a flat surface such as lands / root faces

Work At 90°:

Cladding and other wear resistant coatings removal
Lowering of the plate edge height

 




Part Number/SKU: WA-BM25

* Product Images are for illustration purposes only, unless otherwise specified colour may be different.