Enerdrive Mppt Solar controller 30amp with display

DESCRIPTION

ENERDRIVE MPPT SOLAR CONTROLLER 30AMP 12/24V
Features
The Enerdrive MPPT Solar Controllers adopt the advanced MPPT control algorithm, it can minimize the maximum power point loss rate and loss time, quickly track the maximum power point (MPP) of the PV array and obtain the maximum energy from solar array under any conditions; and it can increase the ratio of energy utilization in the solar system by 20%-30% compared with PWM charging method.

The Enerdrive MPPT Solar Controllers has self-adaptive three-stage charging mode based on digital control circuit, which can effectively prolong the lifespan of batteries and significantly improve the system performance. It also has comprehensive electronic protection for overcharge, over discharge, PV & battery reverse polarity. This controller can be widely used for RV, Marine, remote off grid monitoring and many other applications.

IP33 Ingress protection and isolated RS485 design further improves the controller's reliability and meet the different application requirements.

Enerdrive MPPT Solar Controller Features:

CE certification (LVD EN/IEC62109,EMC EN61000-6-1/3)
LCD display
Advanced MPPT technology & ultra-fast tracking speed guarantee's tracking efficiency up to 99.5%
Maximum DC/DC transfer efficiency is as high as 98.6%.
Advanced MPPT control algorithm to minimize the MPP lost rate and lost time
Accurate recognition and tracking of multi-peaks maximum power point
Wide MPP operating voltage range
Support lead-acid and lithium batteries
Real-time energy statistics function
Power reduction automatically over temperature value
Multiple load work modes
Comprehensive electronic protection
IP33 Ingress protection
Comms port included for future applications

Specifications

Model
EN43510
EN43520
EN43530
EN43540

Nominal Voltage Range
12/24VDC Auto Select ¹

Battery Voltage Range
8 ~ 32V

Maximum Battery Current Output
10A
20A
30A
40A

Maximum Load Current Output
10A
20A
30A
40A

Maximum PV Open Circuit Voltage
100V ²
92V ³

MPPT Voltage Range
(Battery Voltage + 2V) 72V

Maximum PV Array Power Recommended
150W/12V
300W/24V
300W/12V
600W/24V
450W/12V
900W/24V
600W/12V
1200W/24V

Maximum PV Array Power Allowed (Overdrive)
180W/12V
360W/24V
360W/12V
720W/24V
540W/12V
1080W/24V
720W/12V
1440W/24V

Efficiency (Maximum)
98.20%
98.30%
98.60%
98.60%

Self Consumption
≤30mA (12V)
≤16mA (24V)

Temperature Compensate Coeffcient ⁴
-3mV/°C/12V (Default)

Grounding
Common Negative

RS485 Interface
5VDC/200mA (RJ45)

LCD Backlight Timeout
Default: 60S, Range,: 0~999S (OS: the backlight is ON all the time)

ENVIRONMENTAL PARAMETERS

Environmental Temperature ⁵
-25°C ~ +50°C

Storage Temperature Range
-20°C ~ +70°C

Relative Humidity
≤95%, N.C.

IP Rating
IP33

MECHANICAL PARAMETERS

Dimensions (mm) LxWxH
175 x 143 x 48
217 x 158 x 56.5
230 x 165 x 63
255 x 185 x 67.8

Mounting Hole Dimensions (mm)
120 x 134
160 x 149
173 x 156
200 x 176

Mounting Hole Size
ɸ5mm

Maximum Cable Size (Connector Input/Output)
12AWG (4mm²)
10AWG (6mm²)
8AWG (10mm²)
6AWG (13.2mm²)

Recommended Cable Size
(Connector Input/Output)
12AWG (4mm²)
10AWG (6mm²)
8AWG (10mm²)
6AWG (13.2mm²)

1. When lithium battery is used, the system voltage can't be identified automatically.
2. At minimum operating environment temperature.
3. At 25°C environment temperature.
4. When lithium battery is used, the temperature compensate coefficient must be 0, and can't be changed.
5. The controller can supply full load working in the environment temperature. When the internal temperature reaches 81°C, the reduced charging power mode is turned on.