Blue Bar 6 Stud M6 Busbar 150A with Clear Cover – Red, Black or Pair

Blue Bar 6 Stud M6 Busbar 150A with Clear Cover Red, Black or Pair
A 6 stud M6 busbar rated to 150A, with stainless steel studs and a clear push-on cover. It gives you six tidy connection points for 4WD, caravan, camper and dual battery wiring.

6 M6 studs, rated 150A
Suits 12V and 24V systems (48V DC max)
Red for positive, black for negative, or buy the pair
Compact: 150 30 30mm


Blue Bar 6 Stud M6 Busbar 150A with Clear Cover Red, Black or Pair
This 6 stud M6 busbar puts six connection points on one compact 150mm bar. That enough to run a main feed plus five circuits without stacking lugs on a battery post or chassis earth. It rated to 150A, uses M6 studs to suit the smaller lugs common on accessory wiring, and comes in red for positive, black for negative, or as a matched pair. The clear push-on cover keeps the live studs covered while letting you check every connection at a glance.
Key features

6 M6 studs in 304 stainless steel: suit standard 6mm-hole cable lugs
Rated to 150A: plenty of capacity for auxiliary and accessory distribution
12V and 24V compatible: 48V DC maximum
Nickel-plated brass bridge plate joining all six studs
Insulated polypropylene base: red positive or black negative for clear polarity
Clear push-on cover: covers the studs and lets you see the connections
Compact footprint: 150mm long and 30mm wide, fits tight panels and battery boxes
Two end mounting holes: screws down flat

Specifications



Studs
6 M6 (6mm)


Current rating
150A


Maximum voltage
48V DC


Dimensions
150mm (L) 30mm (W) 30mm (H)


Stud material
304 stainless steel


Bridge plate
Nickel-plated brass


Base
Insulated polypropylene (red or black)


Cover
Clear, push-on


Mounting
2 end mounting holes


Part numbers
BB-BB6SM6R (red), BB-BB6SM6B (black), BB-BB6SM6Pair (red black)



M6 or M8 busbar?
Both are rated to 150A. The 6 stud M6 busbar gives you more connection points and suits the M6 lugs common on smaller accessory cables. If your main cables are terminated with M8 lugs, our 5 stud M8 busbar is the better match.
What the M6 busbar suits

Dual battery systems in 4WDs and utes
Caravan, camper trailer and motorhome 12V wiring
Accessory distribution for lights, fridges, USB and 12V outlets
Canopy and drawer system power builds
Common negative points so earths aren stacked on the battery or chassis

Fuse each outgoing circuit to suit its cable. A busbar distributes power but doesn protect it.
Built to spec. Made for the track.
asked questions
What is a 6 stud M6 busbar used for?
A 6 stud M6 busbar gives you one common connection point for up to six cables, so you aren stacking lugs on a battery post. It keeps dual battery, caravan and 4WD wiring tidy, easier to trace and easier to add to later.
What size cable lugs fit this busbar?
It takes lugs with an M6 (6mm) hole. Choose the lug barrel to match your cable size the stud size stays the same.
What the current rating?
The busbar is rated to 150A. Each outgoing circuit should still be fused to suit its own cable size.
Can I use it on a 24V system?
Yes. It rated to 48V DC maximum, so it suits both 12V and 24V systems.
Should I choose the M6 or the M8 busbar?
Choose the M6 for more connection points and smaller M6-lugged cables, or the M8 for heavier cables terminated with M8 lugs. Both are rated to 150A.
What the difference between the red and black versions?
Red is for positive (+) distribution and black is for negative (−). Most new setups need one of each, which is why we also sell them as a matched pair.
-
Variations:
Product Option: Red (Positive)
Product Option: Black (Negative)
Product Option: Pair (Pos & Neg)

-


Visit our website to view thousands more products like this and order online at: