Parts and Accessories
Ortofon Hi-Fi SPU Royal GM MKII Moving Coil Cartridge
You may also like
Parts and Accessories$2,950$425 less
Ortofon MC Transformer ST-80 SE Step-Up Transformer
Parts and Accessories$1,139$2,236 less
Ortofon Hi-Fi SPU Mono CG 65 Di MKII Moving Coil Cartridge
Parts and Accessories$1,435$1,940 less
Ortofon Hi-Fi SPU Mono GM MKII Moving Coil Cartridge
Parts and Accessories$413$2,962 less
Audio Technica AT-VMN50SH Shibata Replacement Stylus
Parts and Accessories$329$3,046 less
ProJect Pick It PRO Balanced Moving Magnet Cartridge
Parts and Accessories$1,620$1,755 less
Ortofon 2M Black LVB 250 Moving Magnet Cartridge - Limited Edition
Parts and Accessories$655$2,720 less
Ortofon 2M Bronze MM Phono Cartridge
Parts and Accessories$1,619$1,756 less
Ortofon 2MR Black LVB 250 (suits Rega turntables) Cartridge
Parts and Accessories$1,099$2,276 less
Audio Technica AT33xMLD Dual Moving Coil Stereo Cartridge
Parts and Accessories$566$2,809 less
Monitor Audio Radius Floor Stand (4G) Speaker Stands
$3,375
Verified seller
Description
Ortofon Hi-Fi SPU Royal GM MKII Moving Coil Cartridge
The SPU Royal GM MkII provides a playback experience that embodies the essence of analog, with generous refinements which bring the legendary SPU cartridges into the realm of unrivalled perfection.
The addition of Ortofons unique Replicant 100 stylus and reduced tip mass ensures open and detailed sound reproduction for a purely exquisite listening experience.
Electrum coils, consisting of a gold and silver alloy, provides uncoloured and precise transmission of armature movements while the slightly modified damping system makes it possible to reduce VTF and achieves a higher level of linearity.
Technical data
Output voltage at 1000 Hz, 5cm/sec. 0.2 mV
Channel balance at 1 kHz
Channel separation at 1 kHz > 25 dB
Channel separation at 15 kHz > 20 dB
Frequency response - 20-20.000 Hz + 1.5/- 0 dB
Tracking ability at 315Hz at recommended tracking force *) > 70 µm
Compliance, dynamic, lateral - 8 µm/mN
Stylus type - Nude Ortofon Replicant 100
Stylus tip radius - r/R 5/100 µm
Tracking force range - 2.5-3.5 g (25-35 mN)
Tracking force, recommended - 3.0 g (30 mN)
Tracking angle - 20°
*) Typical value
Internal impedance, DC resistance - 7 ohm
Recommended load impedance > 100 ohm
Cartridge body material - Ground wood and resin composite
Coil wire material - Electrum/Gold plated silver
Cartridge colour - Shiny black
Cartridge weight - 30 g
*Reprint from manufacturers website
The SPU Royal GM MkII provides a playback experience that embodies the essence of analog, with generous refinements which bring the legendary SPU cartridges into the realm of unrivalled perfection.
The addition of Ortofons unique Replicant 100 stylus and reduced tip mass ensures open and detailed sound reproduction for a purely exquisite listening experience.
Electrum coils, consisting of a gold and silver alloy, provides uncoloured and precise transmission of armature movements while the slightly modified damping system makes it possible to reduce VTF and achieves a higher level of linearity.
Technical data
Output voltage at 1000 Hz, 5cm/sec. 0.2 mV
Channel balance at 1 kHz
Channel separation at 1 kHz > 25 dB
Channel separation at 15 kHz > 20 dB
Frequency response - 20-20.000 Hz + 1.5/- 0 dB
Tracking ability at 315Hz at recommended tracking force *) > 70 µm
Compliance, dynamic, lateral - 8 µm/mN
Stylus type - Nude Ortofon Replicant 100
Stylus tip radius - r/R 5/100 µm
Tracking force range - 2.5-3.5 g (25-35 mN)
Tracking force, recommended - 3.0 g (30 mN)
Tracking angle - 20°
*) Typical value
Internal impedance, DC resistance - 7 ohm
Recommended load impedance > 100 ohm
Cartridge body material - Ground wood and resin composite
Coil wire material - Electrum/Gold plated silver
Cartridge colour - Shiny black
Cartridge weight - 30 g
*Reprint from manufacturers website
Location
Fitzroy, VIC 3065
$3,375
Message seller
About Ortofon Hi-Fi SPU Royal GM MKII Moving Coil Cartridge
Report this ad
Tell us what's wrong with this listing.