LC6625B 40M BLUE CAT6 PATCH LEAD PRO2

FEATURES Category 6 cable, commonly referred to as Cat-6, is a cable standard for Gigabit Ethernet and other network protocols that are backward compatible with the Category 5/5e and Category 3 cable standards. Compared with Cat-5 and Cat-5e, Cat-6 features more stringent specifications for crosstalk and system noise. The cable standard provides performance of up to 250 MHz and is suitable for 10BASE-T, 100BASE-TX (Fast Ethernet), 1000BASE-T / 1000BASE-TX (Gigabit Ethernet) and 10GBASE-T (10-Gigabit Ethernet). To maintain transmission characteristics and network integrity, it's essential to use the correct type of patch-cord to match the installation. A network port will perform only at the level of the LOWEST-rated component in the chain. FEATURES UTP CAT6 Patch Lead - Each cord has eight multi-strand conductors in 4 twisted-pair T568A color coded configuration. Quality cable material - Fitted with 50µ Category-6 compliant 2-row (staggered pins) plug and fully-molded strain-relief boot. Molded strain relief & Low profile flush moulded boots - With molded strain relief RJ45 male-to-male connectors this cable will be strong, and robust. Packaged in heat-sealed hang-sell bags. Complies with the applicable electrical transmission characteristics and flame tests specified in: AS/ACIFS008:2006 ISO/IEC 11801 Category 6 TIA/EIA-568-B.2-1 Category 6 SPECIFICATIONS Conductor Material Bare Copper Size 24AWG Construction 7/0.195±0.015mm Insulation Material HD-PE Thickness Minimum at any point: 0.18mm Maximum average: 0.20mm Diameter: 0.96±0.03mm Jacket Material PVC Thickness Minimum at any point: 0.50mm Maximum average: 0.58mm Diameter: 5.8±0.03mm AVAILABLE MODELS Length Avail. Colours (Patch) Avail. Colours (Crossover) 0.5m   1m 2m   3m   5m 10m 15m   20m   30m   40m   ABOUT PRO.2 CAT6 LEADS Pro2 CAT6 cables pass the Fluke Linkware Cable Test Management performance tests Meanwhile, equivalent CAT6 cables from leading competitors in the market do not pass the same performance test. View the relevant PDF files down below: View the Pro2 Cat6 cable test result (239kb) View the test results of two leading competitors (424kb) View our declaration of conformity View our AS/ACIFS008:2006 Compliance Report Category 6 Cable Standard: Category 6 is a standard that aims to support transmission at frequencies up to 250 MHz over 100Ω twisted pair. Supports current Category 6 applications such as 100BaseTX,100BaseVG, ATM, Gigabit Ethernet and all fast Ethernet protocols. How to distinguish a Cat 6 plug from a Cat-5 or Cat-5E plug: To distinguish a Cat-6 plug from a Cat-5 or a Cat-5E plug, just simply look at the way the cable's wires have been terminated at the end of the plug: A Cat-5 or a Cat-5E plug will ALWAYS have all eight wires in a single row The majority of Cat-6 plugs will have wires in two rows with four wires per row Some Cat-6 plugs will have wires in two rows with 6 wires in the top row and 2 wires in the bottom row initPro2Cat6Patch(); VIDEO Pro.2 CAT6 Leads Explained Video not loading? Watch it over at YouTube! Weight: 1.37 kg Barcode Number: 9328202013026