Spiral Drill Bit INOX HSS-E 13mm x 101mm Pferd 25203585 5PK

SPIRAL DRILL BIT INOX HSS-E 13MM X 101MM PFERD 25203585 5PK

DESCRIPTION:

Drilling tools with cross-grinding for industrial use. Fully ground, right-hand turning versions that produce precise drill holes thanks to their high concentricity and exact centring. Pferd tools offers spiral drills in the steel (118° point angle) and INOX (135° point angle) versions.
High-performance drilling tools in the INOX in HSSE-Co5 (M35) version for industrial uses. Fully ground right-hand-turning version with cross-grinding that produces precise drill holes thanks to its high concentricity and exact centring.

FEATURES:

Very good chip removal.
High concentricity
Exact centring and low feed force thanks to cross grinding.
Particularly well suited for tough and hard materials, such as alloyed and high-strength steel, stainless steel (INOX).
Robust tip profile.
Very long tool life.
Very good temperature resistance due to the co content.

RECOMMENDATIONS FOR USE:

Observe the recommended rotational speeds.
When drilling metals, use a high-quality cutting oil or coolant, if possible. This facilitates smooth running and extends the drill tool life. Exception: when working on aluminium, use kerosene instead of cutting oil.
When working on stainless steel (INOX), remove any particles that break away from the workpiece in order to avoid corrosion. Clean the workpiece chemically or mechanically (etching/polishing, etc.).

SAFETY NOTES:

Wear eye protection.

MATERIALS THAT CAN BE WORKED:

Aluminium
Annealed cast iron
Black annealed cast iron (GTS, GJMB)
Brass
Bronze
Case-hardened steels
Casting scale
Casting scale with sand contamination and metal contamination
Cast iron
Cast steel
Chipboard
Cobalt-based alloys
Copper
Ductile cast iron
Elastomers
Fibre-reinforced thermosetting plastics (GRP, CRP)
Fibre-reinforced thermosetting plastics (GRP, CRP) with a fibre content > 40%
Fibre-reinforced thermosetting plastics (GRP, CRP) with a fibre content 40 %
Grey/nodular cast iron (GG/GJL, GGG/GJS)
Hard aluminium alloys
Nickel-based alloys (e.g. inconell and Hastelloy)
Nickel or titanium-based superalloys
Other
Other non-ferrous metals
Plastics
Roller-bearing and ball-bearing steels
Soft aluminium alloys
Soft non-ferrous metal
Soft titanium alloys (tensile strength 500 N/mm²)
Soft wood
Hardwood
Hard non-ferrous metal
High-temperature-resistant materials 
Stainless steel(INOX)
Steel
Steel, cast steel
Steels over 700 N/mm² (> 220 HB)
Steels up to 1200 N/mm² (
Steels up to 700 N/mm² (
Thermoplastics
Thermosetting plastics
Titanium
Titanium alloys
Tool steels
Tough aluminium alloys
White annealed cast iron (GTW, GJMW)
Wood
Zinc

APPLICATIONS:

Drilling

DRIVE TYPES:

Automated centres
Column drill
Power drill
Tool machine

SPECIFICATIONS:

Angle 135 °
Diameter 13 mm
Flute length 101 mm
Helix angles 36
Length, total 151 mm
PFERD TOOLS type SPB DIN 338 HSSE N 13,0 INOX
PM, grey cast iron, white cast iron 250 - 620 RPM
RPM, hard non-ferrous metals 620 - 1230 RPM
RPM, rust and acid-resistant steels 250 - 490 RPM
RPM, soft non-ferrous metals 740 - 1470 RPM
RPM, steels over 700 N/mm² 490 - 612 RPM
RPM, thermoplastics, fibre-reinforced plastics (GRP/CRP) 370 - 980 RPM
Version INOX
Packaging unit 5 pieces

 




Part Number/SKU: 25203585

* Product Images are for illustration purposes only, unless otherwise specified colour may be different..