Audio Technica AT-LPW50PB Turntable in Piano Black

Introducing the AT-LPW50PB Turntable 

Beautiful in Piano Black

The AT-LPW50PB is a fully manual, belt-drive turntable designed to give you optimal high-fidelity audio reproduction from vinyl. It features an anti-resonance 30 mm thick MDF (medium density fibreboard) plinth, with a high-gloss, piano-black finish, to dampen low-frequency acoustical feedback, and a sensor-monitored motor to ensure accurate platter rotation speeds of 33-1/3 and 45 RPM.

The turntable includes a straight, matte-finish, carbon-fibre tonearm with adjustable tracking force and an AT-HS4 universal ½"-mount headshell with a black AT-VM95E Dual Moving Magnet phono cartridge (black). Audio-Technica has been a leader in phono cartridge design for more than 50 years, and that expertise shows in the versatile, high-performance AT-VM95E cartridge, which comes with a 0.3 x 0.7 mil elliptical stylus, but is also compatible with any VM95 Series replacement stylus, offering a wide choice of options for every budget and application.

The AT-LPW50PB is equipped with a built-in selectable phono preamp and a detachable dual RCA output cable to enable direct connection to components with or without a dedicated phono input.

Stunning Look, Stunning Sound

Marked by the high-gloss, piano-black finish of its anti-resonance plinth, the AT-LPW50PB offers sleek, modern styling to match the supreme accuracy of its sensor-monitored motor.

Designed for a Higher Level of Listening

The AT-LPW50PB is equipped with a straight, matte-finish, carbon-fibre tonearm and comes with an AT-HS4 universal ½”-mount headshell and a special black version of the versatile AT-VM95E Dual Moving Magnet phono cartridge.

Product Features
Fully manual, belt-drive operation with two speeds: 33-1/3 and 45 RPM
Motor features a speed-sensor system to maintain accurate platter rotation speed
Adjustable dynamic anti-skate control
Professional anti-resonance, die-cast aluminium platter with rubber mat
AT-HS4 universal ½"-mount headshell and AT-VM95E Dual Moving Magnet phono cartridge (black) with 0.3 x 0.7 mil elliptical stylus
AT-VM95E cartridge is compatible with any VM95 Series replacement stylus, offering a wide choice of options for every budget and application
Straight, matte-finish, carbon-fibre tonearm with hydraulically damped lift control and lockable rest
Anti-resonance 30 mm thick MDF (medium density fibreboard) plinth with high-gloss, piano-black finish
High-isolation, height-adjustable feet
Built-in switchable phono preamplifier for phono or line-level output
AC adapter handles AC/DC conversion outside of the chassis, reducing noise in the signal chain
Includes dual RCA (male) to dual RCA (male) stereo cable, 45 RPM adapter, rubber mat, and removable hinged dust cover
 
Technical Specifications

Type
Belt drive manual operation

Motor
DC servo motor with Active Speed Stabilisation

Drive Method
Belt-drive

Speeds
33⅓ & 45 RPM

Turntable Platter
Die case aluminium

Wow & Flutter
Signal-to-Noise Ratio
> 60 dB

Output Level

Pre-Amp PHONO
4.0 mV nominal at 1 kHz, 5 cm/sec

Pre-Amp LINE
200 mV nominal at 1 kHz, 5 cm/sec

Phono Pre-Amp Gain
35 dB nominal, RIAA equalised

Power Supply Requirements
100 to 240 V, 50/60 Hz, 0.5 A Max.

Finish
Piano Black Gloss

Dimensions (W x D x H)

With dustcover
420.0 mm (16.54") x 356.0 mm (14.02") x 126.0 mm (4.96")

Without dustcover and hinges
 420.0 mm (16.54") x 356.0 mm (14.02") x 114.0 mm (4.49")

Weight
5.56 Kg (12.26 lbs) 

Warranty
1 Year

In the Box
At-LPW50PB turntable
Dustcover and dustcover hinges
Platter
Turntable mat
Drive belt
Counterweight
AT-HS4 Headshell
AT-VM95E Stereo Cartridge (black)
45 RPM adapter
RCA Audio Cable (approx. 1.0 m (3.3'))
AC adapter (approx. 1.5 m (4.9'))
*This information has been obtained from Manufacturers website. We advise that Features & Specifications are subject change from Manufacturer without notice.

E&OE